[SBE] Loose Circuit Board

[Jeremy D. Morris]

Clean both ends of the connections as best you can.  You may have some leakage as well that could be causing some problems.

Jeremy 

 -----Original Message-----
From: 	Frank Felker [mailto:frank at felkerdigitalmedia.com]
Sent:	Wednesday, May 21, 2008 07:24 PM Eastern Standard Time
To:	sbe at sbe.org
Subject:	[SBE] Loose Circuit Board

Hello All,

I think we can still post technical questions here, right? I know SBE
has started a social list, but my question is technical.

I have a Sony UVW-1800 that will intermittently lose the component
input. I can solve the problem by reseating the circuit cards that are
located parallel to the backplane. Is there something I can spray on the
cards, or do to the card edges that will allow them to stay connected
better? The deck is in an edit room and is not moved around.

Thanks everyone for listening.

Frank Felker



_______________________________________________
SBE mailing list
To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe
_______________________________________________
SBE at sbe.org
http://seven.pairlist.net/mailman/listinfo/sbe