[SBE] Loose Circuit Board
Bill Whitt
billw at betterlifetv.tv
Wed May 21 20:05:09 EDT 2008
I don't know if it is applicable here but worth a shot. I've been known to
use a red eraser to clean the circuit board ends myself. I always use a
non-residue alcohol to clean up after myself ... works great, lasts a long
time. This is mildly abrasive and cleans up connections really well.
Bill Whitt
-----Original Message-----
From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] On Behalf Of Bill
Croghan
Sent: Wednesday, May 21, 2008 4:48 PM
To: 'sbe member discussion mail list'
Subject: Re: [SBE] Loose Circuit Board
I have good luck using Deoxit D5 on this type of problem. It's made by
CAIC. It ain't cheap, but not to bad. Price is about $11.00 for a 200 ml
aerosol can. I buy it at my local electronic parts store.
Bill
Bill Croghan CPBE WBØKSW
Chief Engineer,
KOMP/KXPT/KENO/KBAD/KWWN
Lotus Broadcasting, Las Vegas, NV
> -----Original Message-----
> From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] On Behalf Of Jeremy
D. Morris
> Sent: Wednesday, May 21, 2008 4:36 PM
> To: sbe member discussion mail list
> Subject: Re: [SBE] Loose Circuit Board
>
> Clean both ends of the connections as best you can. You may have some
leakage as well
> that could be causing some problems.
>
> Jeremy
>
> -----Original Message-----
> From: Frank Felker [mailto:frank at felkerdigitalmedia.com]
> Sent: Wednesday, May 21, 2008 07:24 PM Eastern Standard Time
> To: sbe at sbe.org
> Subject: [SBE] Loose Circuit Board
>
> Hello All,
>
> I think we can still post technical questions here, right? I know SBE
> has started a social list, but my question is technical.
>
> I have a Sony UVW-1800 that will intermittently lose the component
> input. I can solve the problem by reseating the circuit cards that are
> located parallel to the backplane. Is there something I can spray on the
> cards, or do to the card edges that will allow them to stay connected
> better? The deck is in an edit room and is not moved around.
>
> Thanks everyone for listening.
>
> Frank Felker
>
>
>
> _______________________________________________
> SBE mailing list
> To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe
> _______________________________________________
> SBE at sbe.org
> http://seven.pairlist.net/mailman/listinfo/sbe
> _______________________________________________
> SBE mailing list
> To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe
> _______________________________________________
> SBE at sbe.org
> http://seven.pairlist.net/mailman/listinfo/sbe
_______________________________________________
SBE mailing list
To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe
_______________________________________________
SBE at sbe.org
http://seven.pairlist.net/mailman/listinfo/sbe
More information about the SBE
mailing list