[SBE] Nycoil question..TV trucks

[Edwin Bukont]

Thanks, good point.

Edwin Bukont CSRE, DRB, CBNT 
V- 240.417.2475; F- 240.368.1265 

 




 


From: jack.davis at engineer.com
To: sbe at sbe.org
Date: Sun, 19 Jul 2009 16:37:22 -0700
Subject: Re: [SBE] Nycoil question..TV trucks











I would try Gorilla Tape, the little snaggy things on wire wraps tend to catch on everything and each other.  A turn every 12 or 18 inches should hold it on and be sure to anchor it securely at the top.
 
Jack Davis
K6YC
 
 
----- Original Message ----- 

From: Edwin Bukont 

To: sbe 

Sent: Saturday, July 18, 2009 11:27 AM

Subject: [SBE] Nycoil question..TV trucks

 
I have a need to add some control circuits and possibly air tubing to operate equipment on top of a 30' mast will-burt mast built into a truck.
 
i cannot put more into the existing nycoil and do not want to modify the contents of the nycoil unless necessary.
 
is there any reason that i could not strap another peice of nycoil to the existing peice,,,and what is the preferred method of doing so?
 
there will be no coax or other RF cables of any sort in this new nycoil, just DC control and some form of small air hose
 
any thoughts appreciated

Edwin Bukont CSRE, DRB, CBNT 
V- 240.417.2475; F- 240.368.1265 

 







_______________________________________________
The SBE Roundtable, SBE at sbe.org
To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe

http://seven.pairlist.net/mailman/listinfo/sbe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/sbe/attachments/20090719/b06fce24/attachment.htm>