[SBE] STL

[dynotherm at earthlink.net]

Henry,

If both antennas are secure and you have confirmed no new intrusions 
into Fresnel zone of the shot that might be moved by wind then I'd plug 
the Rx antenna into a spec/an and watch it for a few hours unless you 
have a spec/an with min. hold feature. (Really nice feature for trouble 
shooting - no watching required for intermittent LoS problems. <g>) 

Phil Alexander, CSRE, AMD


-----Original Message-----
From: A9xw at cs.com
Sent: Jul 20, 2009 11:56 AM
To: sbe at sbe.org
Subject: [SBE] STL

Forgot to mention, took RX to studio, made a wire dipole antenna and 
rx was stable with signal level between -50 and -85 (changed by moving 
antenna) with no variances over 24 hrs.  So problem seems site specific.

Henry