[SBE] Unattended Operation

[Dan Mammone]

Didn't attach one Ben. That is being done from SBE Roundtable signature.
  -----Original Message-----
  From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org]On Behalf Of
Brinitzer, Ben
  Sent: Wednesday, June 15, 2011 10:43 AM
  To: sbe member discussion mail list
  Subject: Re: [SBE] Unattended Operation


  Dan

  The list does not allow attachments and yours was stripped.. can you send
us a link?



  Thanks




  From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] On Behalf Of Dan
Mammone
  Sent: Wednesday, June 15, 2011 10:37 AM
  To: sbe member discussion mail list
  Subject: Re: [SBE] Unattended Operation



  Hi Rick,



  I have used this monitor for alarms. It has automatic control via
scheduler [setup thru web interface], to raise/lower relays or
enable/disable alarms.



  It has two interfaces for control: Dial-up and Web. All functions are
accessible thru these. Alarms can also use both interfaces for notification
by phone or email.



  Hope that helps. If you find the manual unclear, a call to Don Winget will
prove to be fruitful.



  Dan Mammone, CBRE
  Media-Com, Inc
  WNIR 100.1 - WJMP 1520 - W35AX TV35 - WAOH TV29


    -----Original Message-----
    From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org]On Behalf Of Rick
Young
    Sent: Tuesday, June 14, 2011 5:44 PM
    To: sbe at sbe.org
    Subject: [SBE] Unattended Operation

    Hi,
    I'm a contract engineer in Arizona and am installing a WVRC-8 Broadcast
Tools monitor.  >From what I can see, there is no method for raising
lowering power through the day to maintain the licensed power level.  So the
question is, what is actually required for unattended operation?  If we
switch to day pattern (1500w non-directional) there is an old Burk unit
which maintains the power level through macros.  Same at nite.  With the
WVRC-8, there are no macros, just the ability to switch day/nite.  Comments
here are appreciated.  Thanks in advance!

    Rick Young
    Member #5633


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/sbe/attachments/20110615/d1281256/attachment.htm>