[SBE] SBE Digest, Vol 499, Issue 1
Gary Kenny
kjpxtv at gmail.com
Wed Apr 25 11:34:06 EDT 2012
Why not use 2 Ghz or 5.6 Ghz into an omni ant. A simple
1/4 wave coaxial ant.( Coax with, 1/4 wave legnth center conductor and 1/4
wave lenth of the braid pulled back over the insulation.) Gary Kenny KJPX
joplin KJPXTV at gmail.com
On Wed, Apr 25, 2012 at 9:04 AM, Kevin Ruppert <kruppert at wisctv.com> wrote:
> Have you looked in the Pasternack Enterprises catalog?
>
> They might have some kind of rotating waveguide that you could use.
> (75 Ohm)
>
> These type of things are used in antennas for radar or tracking antenna
> for satellite.
>
> -Kevin Ruppert
>
> -----Original Message-----
> From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] On Behalf Of
> sbe-request at sbe.org
> Sent: Wednesday, April 25, 2012 9:00 AM
> To: sbe at sbe.org
> Subject: SBE Digest, Vol 499, Issue 1
>
> Send SBE mailing list submissions to
> sbe at sbe.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://seven.pairlist.net/mailman/listinfo/sbe
> or, via email, send a message with subject or body 'help' to
> sbe-request at sbe.org
>
> You can reach the person managing the list at
> sbe-owner at sbe.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of SBE digest..."
>
>
> SBE Roundtable
>
> Today's Topics:
>
> 1. Video bushing for a rotating stage? (F Berman)
> 2. Re: Video bushing for a rotating stage? (ednixon)
> 3. Whisper Room for sale (Curt Yengst)
> 4. Third Party Call In Management (Jonathan Solomon)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 24 Apr 2012 10:00:46 -0400
> From: F Berman <iamfberman at hotmail.com>
> Subject: [SBE] Video bushing for a rotating stage?
> To: "'sbe member discussion mail list'" <sbe at sbe.org>
> Message-ID: <SNT133-ds816F02AAB1B429FEAF026DB260 at phx.gbl>
> Content-Type: text/plain; charset="us-ascii"
>
> Dear Roundtable: A client would like me to place a couple of HD cameras
> on top of a rotating stage for a one-time, live production. Instead of
> transmitting wirelessly, I'm trying to find a bushing or similar device
> that can be placed in the hole at the center of the stage to allow
> connectivity of video and perhaps some data /telemetry control.
>
> No, I can't stop the rotation or ask that it simply stop after, say, a
> clockwise rotation and then counter-clock, thereby allowing me to simply
> use traditional copper with slack.
>
> While I imagine this could be fabricated, I'm looking for something off
> the shelf with a bulletproof track record, either to rent or to
> purchase.
>
> I figure if anyone in the world knows of a solution for this, it would
> be this group
>
> Thanks in advance for any consideration
>
> Am available off-list, thanks in advance
>
> Frank Berman, CBTE
> iamfberman at hotmail.com
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 24 Apr 2012 07:25:06 -0700
> From: ednixon <ednixon at yahoo.com>
> Subject: Re: [SBE] Video bushing for a rotating stage?
> To: sbe member discussion mail list <sbe at sbe.org>
> Message-ID: <275F36E1-CDD4-43DF-9A1D-ECDADDEE3E38 at yahoo.com>
> Content-Type: text/plain; charset="us-ascii"
>
> BoomRight LLC in Phoenix has such a spinning 360' mount on the end of
> their booms that they showed at NAB.
>
>
> expo.nabshow.com/.../Booth.aspx?...
> BoomRight LLC ... 480-812-5092. info at BoomRight. com www.BoomRight.com<http://www.boomright.com/>
>
> -fm-
>
> Sent from my mobile
>
>
>
> On Apr 24, 2012, at 7:00 AM, F Berman <iamfberman at hotmail.com> wrote:
>
> > Dear Roundtable: A client would like me to place a couple of HD
> > cameras on top of a rotating stage for a one-time, live production.
> > Instead of transmitting wirelessly, I'm trying to find a bushing or
> > similar device that can be placed in the hole at the center of the
> > stage to allow connectivity of video and perhaps some data /telemetry
> control.
> >
> > No, I can't stop the rotation or ask that it simply stop after, say, a
>
> > clockwise rotation and then counter-clock, thereby allowing me to
> > simply use traditional copper with slack.
> >
> > While I imagine this could be fabricated, I'm looking for something
> > off the shelf with a bulletproof track record, either to rent or to
> purchase.
> >
> > I figure if anyone in the world knows of a solution for this, it would
>
> > be this group
> >
> > Thanks in advance for any consideration
> >
> > Am available off-list, thanks in advance
> >
> > Frank Berman, CBTE
> > iamfberman at hotmail.com
> >
> > _______________________________________________
> > The SBE Roundtable, SBE at sbe.org
> > To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe
> >
> > http://seven.pairlist.net/mailman/listinfo/sbe
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://seven.pairlist.net/pipermail/sbe/attachments/20120424/ba0ddb04/a
> ttachment.html>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 24 Apr 2012 15:23:02 +0000
> From: Curt Yengst <cyengst at star991fm.com>
> Subject: [SBE] Whisper Room for sale
> To: "sbe at sbe.org" <sbe at sbe.org>
> Message-ID:
>
> <E6FCAD355E07C4438FC7D62B354BF61337178C31 at POFNJEX01.pillar.local>
> Content-Type: text/plain; charset="iso-8859-1"
>
> For Sale:
>
> 1 Whisper Room isolation booth. 7x7x7. With window and ventilation
> hardware. Very good condition. $4000 or best offer. Buyer must pick
> up in central New Jersey. Pictures available upon request.
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://seven.pairlist.net/pipermail/sbe/attachments/20120424/00bebfe8/a
> ttachment-0001.htm>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 24 Apr 2012 16:04:59 -0400
> From: Jonathan Solomon <jon at thesolomonhouse.com>
> Subject: [SBE] Third Party Call In Management
> To: Society of Broadcast Engineers <sbe at sbe.org>
> Message-ID:
>
> <CAOJaD8o7GREM6jk__KirgAormVVh4ewwtQum808kH0WNqre0TQ at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Good Day Everyone-
>
> Has anyone ever used a third part call in management service? That is a
> third party that would take in your incoming calls for a show (radio,
> TV, whatever), weed out the crazies and present you a list via a web GUI
> or portal for the callers that you might want to take, and then let you
> accept each single caller?
>
> I'm trying to avoid (a) a bunch of POTS or PRI and (b) personnel.
>
> Thank you for your replies in advance.
> Jonathan
>
>
> ------------------------------
>
> _______________________________________________
> The SBE Roundtable
> SBE mailing list
> SBE at sbe.org
> http://seven.pairlist.net/mailman/listinfo/sbe
>
>
> End of SBE Digest, Vol 499, Issue 1
> ***********************************
> _______________________________________________
> The SBE Roundtable, SBE at sbe.org
> To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe
>
> http://seven.pairlist.net/mailman/listinfo/sbe
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/sbe/attachments/20120425/f6c9d4f5/attachment.htm>
More information about the SBE
mailing list