[SBE] RCA Dummy Load
DanRapak at verizon.net
DanRapak at verizon.net
Fri Apr 6 16:33:20 EDT 2018
On 4/5/2018 11:35 PM, K7CR wrote:
>
> Dan – Kinda concerned that it’s bone dry. Perhaps someone dumped the
> contents in the fear it contained PCB’s?
>
Dunno. It was dry when I got it.
>
> Have you put an ohmmeter on the input to make sure that all is well
> inside?
>
Yep. Reads good.
>
> Regarding the Cannon Connector on the end of it – That was usually
> connected to an internal temperature switch that was part of an
> interlock-string.
>
> If you want to use that…I might have a connector, let me know
>
There is a connector on it. (The wires were diked off.) But thanks for
the offer. Much appreciated.
>
> I do know you can put 500 watts into it for some period of time and it
> only gets slightly warm
>
The tag says it's good for 1 KW continuous, 1.5 KW for 30 minutes. That
oughtta do.
>
> Clay/K7CR
>
> *From:*SBE [mailto:sbe-bounces at sbe.org] *On Behalf Of
> *DanRapak at verizon.net
> *Sent:* Thursday, April 05, 2018 7:46 PM
> *To:* sbe at sbe.org
> *Subject:* Re: [SBE] RCA Dummy Load
>
> Thanks Jack. Much appreciated!
>
> On 4/5/2018 10:26 PM, jack.davis wrote:
>
> Darn spell check PCB
>
> Sent from my Verizon, Samsung Galaxy smartphone by smoke signals
>
> -------- Original message --------
>
> From: "jack.davis" <jack.davis at engineer.com>
> <mailto:jack.davis at engineer.com>
>
> Date: 4/5/18 7:19 PM (GMT-08:00)
>
> To: sbe member discussion mail list <sbe at sbe.org>
> <mailto:sbe at sbe.org>
>
> Subject: Re: [SBE] RCA Dummy Load
>
> It will be either 50 or 51.5 ohms and should be good to at least
> channel 13. The plug should be a normally closed thermal switch
> that opens on high temperature.
>
> The oil could be something that smells like fly spray. Very
> obnoxious stuff! Will dissolve vinyl floor tile (don't ask).
> Could be COB.
>
> Jack
>
> K6YC
>
> Sent from my Verizon, Samsung Galaxy smartphone by smoke signals
>
> -------- Original message --------
>
> From: DanRapak at verizon.net <mailto:DanRapak at verizon.net>
>
> Date: 4/5/18 6:02 PM (GMT-08:00)
>
> To: SBE Broadcast Group <sbe at sbe.org> <mailto:sbe at sbe.org>
>
> Subject: [SBE] RCA Dummy Load
>
> All:
>
> I'm looking for information on an old dummy load. I have an old
> RCA liquid cooled dummy load that's been collecting dust for
> several years. It is an RCA P/N 216251. It's a nice unit with
> substantial heat fins. It's rated at 1 KW continuous and 1.5 KW
> for 30 minutes. I'm about to put it in service in the ham shack.
> However, I have no manual for it.
>
> My first question is, does anyone know what the frequency range of
> this unit is?
>
> Second, there is a two-pin, military style Amphenol connector on
> the the dummy load. What is the purpose of this connection?
>
> Finally, what is the recommended transformer oil / coolant for
> this thing?
>
> Any help would be appreciated.
>
> Thanks in advance,
> Dan Rapak
>
>
>
>
>
> _______________________________________________
>
> The SBE Roundtable,SBE at sbe.org <mailto:SBE at sbe.org>
>
> To unsubscribe, go tohttps://pairlist7.pair.net/mailman/options/sbe
>
> https://pairlist7.pair.net/mailman/listinfo/sbe
>
>
>
> _______________________________________________
> The SBE Roundtable, SBE at sbe.org
> To unsubscribe, go to https://pairlist7.pair.net/mailman/options/sbe
>
> https://pairlist7.pair.net/mailman/listinfo/sbe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist7.pair.net/pipermail/sbe/attachments/20180406/3f69967a/attachment.html>
More information about the SBE
mailing list