[SBE] Sony HDCU900 2 wire comms

[Jonathan Solomon]

Hi Folks-

Just wanted to close the loop on this one for the archive.  Turns out that
enven though I am using ClearCom, and have all the switch and dial settings
to ClearCom, There are two dials/pots that should be set to "RTS".  Problem
solved!  Thanks for all your responses!

On Mon, Jun 4, 2018 at 5:37 AM Jonathan Solomon <jon at thesolomonhouse.com>
wrote:

> Hi Jeff
>
> Thanks for the reply.  I agree with you, but in this case I don’t have the
> budget and operators will deal with the level issues. Unfortunately he
> attachment didn’t carry. Can you resend direct ?
>
> Thanks ?
>
> On Mon, Jun 4, 2018 at 8:10 AM Jeffrey Martin via SBE <sbe at sbe.org> wrote:
>
>> 2W into a Sony CCU, in my experience, does not work very well because you
>> do not have control over levels.  I would suggest getting a 2w to 4W
>> converter such as a Clearcom IF4W4.  You will be glad you did.
>>
>> See attached for a 2W connection.
>>
>> - Jeff
>>
>>
>>
>> On Friday, June 1, 2018, 9:17:57 AM CDT, Tony Mancari <tmancari at wvpt.net>
>> wrote:
>>
>>
>> r u perhaps running thru a 4 wire to 2 wire external converter in the
>> path somewhere?
>>
>>
>> On Fri, Jun 1, 2018 at 10:08 AM, Jonathan Solomon <jonstv at gmail.com>
>> wrote:
>>
>> Thank you John and Rod!
>>
>> However that only shows balanced 4w. I’ve got a 2w PL.
>>
>> Amy thought?
>>
>> Sent from my iPhone
>>
>> On Jun 1, 2018, at 9:45 AM, John Peterson <jpeterson at prairiepublic.org>
>> wrote:
>>
>> This is from a HDCU1000 25 pin.
>>
>> On Fri, Jun 1, 2018 at 8:01 AM, Jonathan Solomon <jonstv at gmail.com>
>> wrote:
>>
>> Good Morning!
>>
>> Does anyone know the pinout for a 2w intercom for a Sony CCU (25 pin)?
>>
>> Thanks !
>> Jonathan
>>
>>
>> _______________________________________________
>> The SBE Roundtable, SBE at sbe.org
>> To unsubscribe, go to https://pairlist7.pair.net/mailman/options/sbe
>>
>> https://pairlist7.pair.net/mailman/listinfo/sbe
>> _______________________________________________
>> The SBE Roundtable, SBE at sbe.org
>> To unsubscribe, go to https://pairlist7.pair.net/mailman/options/sbe
>>
>> https://pairlist7.pair.net/mailman/listinfo/sbe
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist7.pair.net/pipermail/sbe/attachments/20180628/13573476/attachment.html>