[Techtoolslist] Considering making FlukeEm open source...

James Bright james at quarterarcade.com
Wed Nov 16 08:43:16 EST 2005


And actually if you reversed engineered the I/O module too, you could essentially replace the 9100A. It's a little more involved (both reverse engineering the I/O module and writing the database software). However, the 9100A using the I/O module is EXTREMELY powerful.

I'd write the IDE/database program for the 9100A like app so long as no one cared that it was C# :-)

JB

----------------------------------------
From: Adam Courchesne <ajcrm125 at gmail.com>
Sent: Wednesday, November 16, 2005 5:45 AM
To: Technical Tools Mail List <techtoolslist at flippers.com>
Subject: Re: [Techtoolslist] Considering making FlukeEm open source...

Whoever designed the pods took the time to understand the functionality of each respective processor. For example, for processor type ABC, a read consists of putting the read address on the address in cycle N, then expect the data in cycle N+1. They then wrote code to support this behavior and programmed it into the pod, so that when a read command is received from the Fluke, it performs these functions. For processor XYZ, the read (and thus POD) behavior would be completely different.

Writing a direct uP USB adapter is certainly possible, but in doing so we would be reinventing the wheel. (I think some other companies have these?)

What I wanted to do is look at the commands getting sent from the Fluke to the pod. (I.E. what gets sent to the pod when the READ @ 7000 command is sent) Once I get a full understanding of the Fluke to POD command interface, I can then write an ICE (In Circuit Emulator) that supports these pods. Think about it.. you could write Z80 C or assembly code on your PC, and use this program to execute it on the native Z80 based system the pod is plugged into. Real time code development and debug baby. :-)

On 11/15/05, Tom McClintock <tomm at mgcap.com> wrote: Why stay with the POD at all? Why not a USB to CPU adapter cable or
something similar?

tm
-Adam
====================
http://www.onecircuit.com
====================

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/techtoolslist/attachments/20051116/a6aad50f/attachment.htm>


More information about the Techtoolslist mailing list