[Techtoolslist] Fluke 9100 pod recognition after software install
Art Mallet - Artfromny
artfromny at nycap.rr.com
Wed Jan 10 23:16:56 EST 2007
Sorry, that should not have made it to the list
Art
----- Original Message -----
From: "Art Mallet - Artfromny" <artfromny at nycap.rr.com>
To: <ayeckley at sierralobo.com>; "Technical Tools Mail List"
<techtoolslist at flippers.com>
Sent: Wednesday, January 10, 2007 11:05 PM
Subject: Re: [Techtoolslist] Fluke 9100 pod recognition after software
install
> UPS on the 2 boxes was 44.72
>
> I had NO idea these things were so damn complicated - I will stick to the
> 9010 for my own use :)
> Remember I have one more main unit, complete, for sale - I also sold one
> that I may have to take back (bad HDD) - if you have any interest in them
> Art
>
> ----- Original Message -----
> From: "Alex Yeckley" <ayeckley at sierralobo.com>
> To: "'Technical Tools Mail List'" <techtoolslist at flippers.com>
> Sent: Wednesday, January 10, 2007 10:56 PM
> Subject: Re: [Techtoolslist] Fluke 9100 pod recognition after software
> install
>
>
>> >sure enough, i formatted the drive
>>
>> Anyone familiar with the "controller returned error f6h" message? I'm
>> getting that consistently when I try to format my Miniscribe, regardless
>> of
>> which interleave option I select (0-6). I've swapped out the MFM/SCSI
>> adapter as well as the interface board. IIRC, I'm even getting that
>> message
>> using different drives. Running ROM rev 5, and using Service Disk image
>> 1.4
>> that Andy provided earlier today.
>>
>> Alex
>> ----
>> ayeckley at elektronforge.com
>> www.elektronforge.com
>>
>>
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist at flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>>
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>
More information about the Techtoolslist
mailing list