[Techtoolslist] Data I/O 29B to PC cable?

[Arcadeforever]

I use a regular serial cable 25 -> 9 with a null modem adapter, that works
for me..

Wayne

On Nov 27, 2007 10:19 AM, Joe Magiera <joemagiera at ameritech.net> wrote:


> Modified the subject to be more accurate...

>

> Martin, thanks much for that info.

>

> Ok, can anyone else confirm that they use a cable/connection as shown in

> the

> link below, or have they been able to use a standard serial 25 pin cable

> on

> both sides (Data I/O and PC)?  Thanks,

>

> Joe

>

> -----Original Message-----

> From: techtoolslist-bounces at flippers.com

> [mailto:techtoolslist-bounces at flippers.com] On Behalf Of

> martin at guddler.co.uk

> Sent: Tuesday, November 27, 2007 8:43 AM

> To: Technical Tools Mail List

> Subject: Re: [Techtoolslist] Data I/O 29B on XP?

>

> I had no idea that mark's website had now gone, but thanks to

> archives, here's the info you need:

>

> http://web.archive.org/web/20051230044833/www.leopardcats.com/dio/dataioseri

> al.htm

>

> I can confirm that his info is correct since he made the cable that I

> have here.

>

> Martin.

>

> On 27 Nov 2007, at 14:37, Joe Magiera wrote:

>

> > The cable isn't a standard serial cable?  Did you have to mod the

> > cable or

> > is it some other standard cable that I can just get at my local PC

> > store?

> >

> > Joe

> >

> > -----Original Message-----

> > From: techtoolslist-bounces at flippers.com

> > [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Bill Karkula

> > Sent: Monday, November 26, 2007 10:51 PM

> > To: 'Technical Tools Mail List'

> > Subject: Re: [Techtoolslist] Data I/O 29B on XP?

> >

> > I can confirm the version below works on my Dell PIII-700 and XP.

> > Is your

> > cable OK? You do need a specifically wired cable as shown in the

> > Data I/O

> > manual and to set the baud rate (going from my memory here) to 9600

> > N 8 1.

> > Also, is the serial port enabled in your BIOS?

> >

> > Best Regards,

> >

> > Bill

> > -----Original Message-----

> > From: techtoolslist-bounces at flippers.com

> > [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Arcadeforever

> > Sent: Monday, November 26, 2007 9:08 PM

> > To: Technical Tools Mail List

> > Subject: Re: [Techtoolslist] Data I/O 29B on XP?

> >

> > Works fine for me too, download the version from mikes arcade.com

> >

> > On Nov 26, 2007 3:44 PM, Joseph Magiera <joemagiera at ameritech.net>

> > wrote:

> >

> >> Can anyone confirm that they can interface with a Data I/O 29B

> >> using a PC

> >> running Windows XP?

> >>

> >> I finally am going to try to get my Data I/O going, and I plan on

> >> using a

> >> Pentium III, 500mg PC, loaded with Windows XP.  A pretty unpowerful

> > computer

> >> by today's standard, but should be plenty for running the Data I/O

> > software

> >> (if it can indeed work on XP).

> >>

> >> Any tips or tricks to note on installing/running?  Thanks,

> >>

> >> Joe

> >> joemagiera at ameritech.net

> >>

> >> _______________________________________________

> >> Techtoolslist mailing list

> >> Techtoolslist at flippers.com

> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >>

> >

> >

> >

> > --

> > Wayne Moore

> > _______________________________________________

> > Techtoolslist mailing list

> > Techtoolslist at flippers.com

> > http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >

> > _______________________________________________

> > Techtoolslist mailing list

> > Techtoolslist at flippers.com

> > http://seven.pairlist.net/mailman/listinfo/techtoolslist

> >

> > _______________________________________________

> > Techtoolslist mailing list

> > Techtoolslist at flippers.com

> > http://seven.pairlist.net/mailman/listinfo/techtoolslist

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>




-- 
Wayne Moore