[Techtoolslist] Help troubleshooting a 9010A
barry2 at shilmover.com
barry2 at shilmover.com
Tue May 26 21:41:10 EDT 2009
Hooked up the 2nd 9010A. It returns:
R/W ERR @ C000 BTS 12 - LOOP?
Barry
----------------------
I been having trouble posting to the group... trying again.
I have 2 non-working 9010A units. On both they beep once, LEDs flash, then
nothing.
Hooked up a working 9010A that I borrowed (thanks David). Bus tests fine. RAM
returns the following:
R/W ERR @ C000 BTS 08 - LOOP?
Manual states:
If a RAM failure occurs, carefully examine the diagnostic message. The RAM
Test is usually sufficient for deducing the failed component directly.
It then does not explain how to read the message. :-) I am new to this, so be
kind if its a stupid question.
I deduced that there is a Read/Write error at C000. How do I "deduce" the
failed component?
Barry
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
More information about the Techtoolslist
mailing list