[Techtoolslist] 9010a RS232 problem?

Peter Matthews peter.matthews at pmm.org.uk
Tue Jan 5 03:30:53 EST 2010


What operating system are you using? I had a great RS232 link for some years
with windows XP. With Vista I got problems similar to yours. I discovered
that FIDE does not work in Vista and the program was not compiling. Please
check that you have no error messages at the end of the compile stage. I
solved it by running FIDE in virtual machine XP.
Regards
Peter

-----Original Message-----
From: techtoolslist-bounces at flippers.com
[mailto:techtoolslist-bounces at flippers.com] On Behalf Of Danny Pearson
Sent: 04 January 2010 20:16
To: 'Technical Tools Mail List'
Subject: Re: [Techtoolslist] 9010a RS232 problem?

Hi Kevin, make sure the RS232 card is firmly seated. I had issues which I
resolved by reseating it a bit more firmly and screwing it down tight.

Cheers,

Dan

-----Original Message-----
From: techtoolslist-bounces at flippers.com
[mailto:techtoolslist-bounces at flippers.com] On Behalf Of Kevin Moore
Sent: 03 January 2010 21:18
To: jrr at flippers.com; Technical Tools Mail List
Subject: Re: [Techtoolslist] 9010a RS232 problem?

It's not a pod problem, I can use the fluke normally w/o problem. I'm trying
to hook up the rs232 to a computer to upload scripts. It only resets after
hitting enter/yes after doing an Aux/if, read. while trying to send a script
to the fluke.

I've been trying to read up on the program to test the rs-232, but I've not
programed the fluke manually before, so It get's a little confusing manually
entering the program.

I have checked the power supply for problems etc when I first got it about 6
months ago.

On Sun, Jan 3, 2010 at 2:28 PM, John Robertson <jrr at flippers.com> wrote:


> Kevin Moore wrote:

>

>> Ok the holidays are over, and I'm back to trying to get my Fluke hooked

up

>> to the computer so I can do scripts.

>>

>> Problem I'm having is that when I enter the following Aux/if , Read , Yes

>> the fluke resets after 1-2 secs.

>>

>> It will also do this with the serial port unplugged.

>>

>> I'm wondering if the is a normal action, like the Fluke is looking for a

>> signal from the com port to wait, or if there is a problem with my

fluke..

>>

>> Thanks,

>>

>> Kevin

>>

>>

> Try leaving a pod hooked up in Self-Test and leave it running for a while

-

> the machine should not reset...

>

> If it does then something may well be wrong with the 9010 and I would

check

> the power supply first - looking for failing caps is the first item on the

> check list.

>

> John :-#)#

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>

_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/


--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 27020 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len

The Professional version does not have this message


_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/




More information about the Techtoolslist mailing list