[Techtoolslist] Fluke 9010a 68000 Pod Eprom TestingonOutrun- help please !!

John Robertson jrr at flippers.com
Wed Jun 9 18:56:11 EDT 2010



Andrew Welburn wrote:

> And this is why i love my Fluke 9100A ;-)

>

> mwuhahahhahah

> --

> Andrew Welburn

> http://www.andys-arcade.com


So, the 9100A (with the programming option) is that much better than the
9010? Eh?

I have three of them parked, and was looking into solid state drives to
replace the (potentially) dying SCSI ones...maybe the time is now to
look at those beasties again!

John :-#)#


> ----- Original Message ----- From: "Mike Coates" <mike at the-coates.com>

> To: "Technical Tools Mail List" <techtoolslist at flippers.com>

> Sent: Wednesday, June 09, 2010 10:44 PM

> Subject: Re: [Techtoolslist] Fluke 9010a 68000 Pod Eprom

> TestingonOutrun- help please !!

>

>

>> If a 68000 system uses 8 bit roms then they will be interleaved in

>> the memory map, hence generating the rom signature for just the 8 bit

>> rom on it's own is not going to match.

>>

>> I guess it either uses a different algorithm, or you need to

>> interleave the two roms, and generate the checksum for the new double

>> sided rom.

>>

>> biggest pain I found with the Fluke pod is that you can only do 16

>> bit read/writes - I had some hardware that had a custom chip that

>> processed 32 bit writes, so had to 'poke' some machine code in to ram

>> and call that to do the job.

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>

>



--
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
www.flippers.com
"Old pinballers never die, they just flip out"




More information about the Techtoolslist mailing list