[Techtoolslist] FLUKE 9100A SERIES QUESTION

Danny Pearson dannypearson at hotmail.com
Tue Nov 30 12:06:51 EST 2010


There's no love shared for the 9100 cos they're so damn hard to find. I'd
readily share anything I did on one if I ever get one, but then I don't have
anything to lose from sharing whereas a lot of people who already have them
do (at a guess).

Can you create an image an cut out the stuff you don't want to share? Be
good to have a readily available vanilla image I'm sure.

Dan

-----Original Message-----
From: techtoolslist-bounces at flippers.com
[mailto:techtoolslist-bounces at flippers.com] On Behalf Of
martin at guddler.co.uk
Sent: 30 November 2010 16:22
To: jrr at flippers.com; Technical Tools Mail List
Subject: Re: [Techtoolslist] FLUKE 9100A SERIES QUESTION

I have an image for 6.1

1. How would I know if it's serialised?
2. My machine is an FT does it matter?
3. Related to point 2, it might matter that the image would be for a 60mb
drive as that's what my scsi drive was before I went down the compact flash
road.

I'd be happy enough for the image to be used on an ad-hoc basis. Not so sure
I'd be happy for it to be hosted for the whole world to grab.

Not sure how that last paragraph will sit with people but I hope you'd
understand. I have stuff on here I've put hard work into and there seems to
be barely any sharing the love when it comes to 9100's :)

Maybe that could change?

Martin.

Sent from my iPhone

On 30 Nov 2010, at 15:52, John Robertson <jrr at flippers.com> wrote:


> Andrew Welburn wrote:

>> Seconded, normal behaviour.

>>

>> And for others - you can hot-swap pods no problems.

>>

>> --

>> Andrew Welburn

>> http://www.andys-arcade.com

>

> That's good to know...now I am getting ready to experiment with converting

a 9100 with a SCSI to Flash adapter kludge (SCSI to IDE to Flash)...but I
need a disk image for 6.1 that is not serialized. Anyone have this?

>

> John :-#)#

>> ----- Original Message ----- From: <martin at guddler.co.uk>

>> To: "Technical Tools Mail List" <techtoolslist at flippers.com>

>> Sent: Monday, November 29, 2010 10:42 AM

>> Subject: Re: [Techtoolslist] FLUKE 9100A SERIES QUESTION

>>

>>

>>> Al,

>>>

>>> Do you have the ribbon cable in the test socket? If so, this is normal

behavior.

>>>

>>> Martin.

>>

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>>

>>

>

>

> --

> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call

(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)

> www.flippers.com "Old pinballers never die, they just flip

out"

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/




More information about the Techtoolslist mailing list