[Techtoolslist] Programming 8742 for Fluke 9100 display driver

[Barry Shilmover]

Thanks John.

B

-----Original Message-----
From: techtoolslist-bounces at flippers.com
[mailto:techtoolslist-bounces at flippers.com] On Behalf Of John Robertson
Sent: Tuesday, March 15, 2011 9:22 AM
To: techtoolslist at flippers.com
Subject: [Techtoolslist] Programming 8742 for Fluke 9100 display driver

(from Barry Shilmover  -  barryshi at microsoft.com - who is having trouble
posting to TTL)


All,

 

I have a couple of 9010As that are almost working.  First the displays.

 

On the first, the 10^th digit is out.  On the second, the bottom right 
element is out.  Pictures:  
https://cid-bba5427c148a431e.photos.live.com/browse.aspx/Fluke?wa=wsignin1.0
&sa=2572323 
<https://cid-bba5427c148a431e.photos.live.com/browse.aspx/Fluke?wa=wsignin1.
0&sa=2572323> 


 

Also, this chip is bad on one of them (if I swap it, it works): 
 
https://rqmyca.bay.livefilestore.com/y1pY3S0hpBKibGxaXT2fqnRaTXm0eTt3HOzTz9i
1wz72bUebA12DPjSCcwmtIjZJlIQkceXFvt6Fzu3S8x6sbAh3WfVTGyTCt1G/85%20(2).jpg?ps
id=1 
<https://rqmyca.bay.livefilestore.com/y1pY3S0hpBKibGxaXT2fqnRaTXm0eTt3HOzTz9
i1wz72bUebA12DPjSCcwmtIjZJlIQkceXFvt6Fzu3S8x6sbAh3WfVTGyTCt1G/85%20%282%29.j
pg?psid=1> 


 

I have some of these that I was told could be programmed:  
 
https://rqmyca.bay.livefilestore.com/y1pHgvTxDeSEiwOa1lPnpozEPN8nvl_berxBMfW
EUvcaz6MbM44sAK1KiPJbutkkPX9xDb0Nft8tZ-bhI3-6wFUopKFuVF_w3aw/87%20(2).jpg?ps
id=1 
<https://rqmyca.bay.livefilestore.com/y1pHgvTxDeSEiwOa1lPnpozEPN8nvl_berxBMf
WEUvcaz6MbM44sAK1KiPJbutkkPX9xDb0Nft8tZ-bhI3-6wFUopKFuVF_w3aw/87%20%282%29.j
pg?psid=1> 


 (suggestions welcome to fix these problems)

Thanks,

 

B

 

_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/