[Techtoolslist] message

[John Robertson]

CRC wrote:

> On 4 Oct 2012, at 6:05 PM, adolfo bustos wrote:

>   

>> in a message to techtoolslist-request at flippers.com:

>> techtoolslist at flippers.com

>> Prom Burner  B&C Microsystems, Model 1409C

>> Anyone know the Program "" Burner.exe ""

>> compatible IBM .-

>> for

>> Universal E(e)prom Programmer

>> B&C Microsystems

>> 1409C Programmer

>> Model 1409C ver 10.2CT

>> Any info would be greatly appreciated.

>> Thanks,

>> Adolfo

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> FTP site is: ftp://ttl.arcadetech.org

>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>>     

>

>

> Adolfo -

>

> I begged a copy of an older version of their "burner" program a while ago. It supports the 1400 and 1400/87. There is a slightly newer version, but it wouldn't work with my 1200.

>

> I put the program at: <https://www.dropbox.com/sh/ztgxu9w53n08aba/j2nxmKCAWD>.

>

> You might drop support at BP a note asking for a later version that supports your programmer.

>

> Beware, I found that this program will not run on a current PC - I had to dig up a 500 MHz ancient box to run the programmer.

>

> I hope this helps ->CRC

> _______________________________________________

>   

If you can zip that up I'll add it to the archives...

John :-#)#