[Techtoolslist] Directory success !!! (for HDR that is.)

[John Robertson]

Hi Andre,

I'll check it out over the weekend, have permitted it out into the wilds 
of TTL mail list as well. Lets hope it is not another copy of the 
original one from TTL!

Thanks!

John :-#)#

Andre Huijts wrote:

> John,

>

> I found one disk with a hand written label Service disk V6.0

>

> I just made a Samdisk image of it and attached it to this mail not sure if that works or not....I also don't know if it's serialized or not ....

> At least you will have 3 disks/images to look at.

>

>

>   

> ------------------------------------------------------------------------

>

>

>

> Op 13 dec. 2012, om 21:16 heeft John Robertson <jrr at flippers.com> het volgende geschreven:

>

>   

>> David Ryskalczyk wrote:

>>     

>>> There's a Teledisk image of a service disk, as well as a bunch of

>>> other documentation, over here:

>>>

>>> http://www.iobium.com/9100a%20tester/

>>>

>>> Not sure whether this one is serialized or not.

>>>

>>> --David

>>>  

>>>       

>> That's Martin Reynolds site - another TTL past regular...(are you still around Martin?)

>>

>> http://www.iobium.com/9100a%20tester/9100atester.htm

>>

>> Interesting that he talks about Service disk 6.0...I will take another look at the file Service.TD0 on his site, thanks!

>>

>> John :-#)#

>>     

>>> On Thu, Dec 13, 2012 at 2:09 PM, John Robertson <jrr at flippers.com> wrote:

>>>  

>>>       

>>>> Andre Huijts wrote:

>>>>    

>>>>         

>>>>> Andrew....I'm not stupid. I understand what it can do for about 90% by

>>>>> now, I've read enough to have a pretty clear picture.

>>>>>

>>>>> However, without any programs that actually DO a 100% test it's not really

>>>>> worth anything right ?

>>>>>

>>>>> Please stop talking down to me Andrew, I'm not a moron.....

>>>>>

>>>>>

>>>>>      

>>>>>           

>>>> Hey, Andre, Andrew is just pulling your leg!

>>>>

>>>> The 9100 can be a bit of a boat anchor/door stop unless you really get into

>>>> it. They are still in wide use industrially as they are often the only

>>>> machine keeping production line equipment running that was designed in the

>>>> 80s and 90s.

>>>>

>>>> Even the basic tests are superior to the 9010 though as you can easily store

>>>> the results and easily make lookup tables for individual games if you have

>>>> the programming option.

>>>>

>>>> I've found the renewed interest in the 9100 (thanks in large part to Andre)

>>>> to be refreshing my desire to get this great tool in use in my shop - for

>>>> too many years have they been sitting on a shelf being ignored. I mostly use

>>>> the 9010 and my collection of pods to troubleshoot, and while that is fine

>>>> for me, it would benefit my staff if I got a 9100 running with the tests

>>>> built in for are common game board (Atari, Bally, Williams, etc.) that come

>>>> through on a regular basis and while the test fixture gives us a pretty good

>>>> idea of the problems, integrating a 9100 could speed up the tests

>>>> significantly.

>>>>

>>>> The beauty of the 9100 is the GFI. I see building tests for Capcom and other

>>>> orphans of the pinball world where no test fixtures exist or are more money

>>>> than one cares to spend when you only see the game once every few years -

>>>> however a guided test for the driver board, shared with this group, could

>>>> help a number of shops deal with these games quickly.

>>>>

>>>> Making up a Bed Of Nails test jig that is hooked to the 9100 seems to be a

>>>> good project for 2013 and I for one will be exploring this project in the

>>>> new year.

>>>>

>>>> Have to get past Xams first - we are very busy right now!

>>>>

>>>> Still also hoping to find a non-serialized copy of 6.0 Service (was included

>>>> in the 40MB SCSI upgrade kit) - or even a copy that has a different serial

>>>> number to compare.

>>>>

>>>> Another project is to check the wiring changes to the motherboards - I

>>>> suspect the latest ones (I have a "G" revision) allow you to use the 1.44

>>>> floppies, a number of jumpers around the floppy connector...

>>>>

>>>> John :-#)#

>>>>

>>>>    

>>>>         

>>>>> Op 13 dec. 2012, om 17:50 heeft Andrew Welburn <andy at andysarcade.net> het

>>>>> volgende geschreven:

>>>>>

>>>>>

>>>>>      

>>>>>           

>>>>>> Andre..

>>>>>>

>>>>>> You havn't read all the manuals, and dont fully grasp what the 9100 can

>>>>>> do. Its much, much more than a 9010, its a complete 100% pcb test system, as

>>>>>> i've previously described, its not limited to rams and roms. Read up and

>>>>>> learn my young jedi.

>>>>>>

>>>>>>

>>>>>> Andrew Welburn

>>>>>> http://www.andys-arcade.com

>>>>>>

>>>>>> On 13/12/2012 16:45, Andre Huijts wrote:

>>>>>>

>>>>>>        

>>>>>>             

>>>>>>> Funny, I was thinking about using Centi as well.....reasons were because

>>>>>>> I own one, it's a raster game (seemed simpler than a vector game to me) and

>>>>>>> Atari already makes the schematics in "functional blocks"......

>>>>>>>

>>>>>>> Been trying to read in the Applications manual today (during work

>>>>>>> breaks....) and I nodded off at least 10 times....apart from that, it's sure

>>>>>>> not easy....

>>>>>>>

>>>>>>> However.....correct me if I'm wrong, but I think the majority of

>>>>>>> problems can be found using the very "basic" tests (which are actually

>>>>>>> pretty thorough) being the address and databusses, finding bad buffers and

>>>>>>> doing RAM and ROM checks. As such it's not much more than a 9010 I guess,

>>>>>>> which is a bit of a shame of course, but I don't see anyone investing so

>>>>>>> many hours to get programs done  for himself or maybe a couple of other guys

>>>>>>> interested.....

>>>>>>>

>>>>>>> It would be cool to have a program for POKEY (if only to make it produce

>>>>>>> some sounds ;) ) f.i., on the other hand, swapping one takes just seconds

>>>>>>> and most of the signals of it being defective are pretty well known....

>>>>>>>

>>>>>>> Someone should write a program that scans the schematics of any PCB and

>>>>>>> turns it into a TL/1 program ;)

>>>>>>>

>>>>>>> André

>>>>>>>

>>>>>>>          

>>>>>>>               

>>>>    

>>>>         

>>

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> FTP site is: ftp://ttl.arcadetech.org

>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>>     

>

> André Huijts

> andre.huijts at upcmail.nl

>

>

>

>

>

>   



-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"