[Techtoolslist] Fluke 9010A Install with FIDE

[JJ]

I tried the prior and all my settings look good.  Anyone have the cable pin outs?  I would like to ohm out the cable.

Thanks

Justin

Sent from my Verizon Wireless 4G LTE DROID

Rodger Boots <rlboots2 at gmail.com> wrote:


>Flow control is probably off or set wrong on computer end.  Open up control

>panel, system, hardware, com ports.  Selects your com port and port

>settings.  Flow control should be XON/XOFF for software flow control or

>Hardware for hardware flow control.  Use whichever matches the programmer

>setup.

>

>If you're using Hardware and it doesn't work your null modem cable may be

>wired wrong.

>

>Good luck.

>

>

>On Fri, Apr 12, 2013 at 5:36 PM, JJ <rugd2go at comcast.net> wrote:

>

>> I tried to connect to my 9010a and laptop using xp and received a buffer

>> overrun or overflow message on the 9010.  Any ideas on what the cause might

>> be? I was using a null cable.

>>

>> Justin

>>

>> Sent from my Verizon Wireless 4G LTE DROID

>>

>> Matthew Rossiter <matt at rossiters.com> wrote:

>>

>> >Has anyone gotten Fluke FIDE to work in Windows 7?   I've always just

>> >used my old Win XP laptop with a USB/Serial adapter and it works great.

>> >

>> >On 4/12/2013 11:13 AM, Theron Troxel wrote:

>> >>

>> >> I found out what I was doing wrong.  Didn't have a null modem cable

>> adapter.  Ended up ordering a serial cable adapter, which I knew I didn't

>> want.   Will try again with the correct part.

>> >>

>> >> ________________________________

>> >>   From: Theron Troxel <troxelone at yahoo.com>

>> >> To: Technical Tools Mail List <techtoolslist at flippers.com>

>> >> Sent: Friday, April 12, 2013 1:07 PM

>> >> Subject: Re: [Techtoolslist] Fluke 9010A Install with FIDE

>> >>

>> >>

>> >>

>> >>

>> >>

>> >> ________________________________

>> >> From: Theron Troxel <troxelone at yahoo.com>

>> >> To: "techtoolslist at flippers.com" <techtoolslist at flippers.com>

>> >> Sent: Monday, April 1, 2013 5:50 PM

>> >> Subject: [Techtoolslist] Fluke 9010A Install with FIDE

>> >>

>> >> Trying to get my fluke to respond to my computer. I have a USB-to-RS232

>> cord, and my computer recognize the cord. I went to settings on my computer

>> and set it to com1 and matched everything to the computer and fluke.

>> >>

>> >> Wrote a simple program that just displays "test" and tried sending it

>> through the Fluke FIDE software. The fluke never responds to when I send

>> the program. I don't get any errors of any type on the fluke. However, on

>> the Fluke FIDE I get the following error:

>> >>

>> >>

>> >> Starting process...

>> >> WARNING: Include file already exists. File may have been included

>> >> multiple times, or two files with the exact same file name may exist.

>> >> It is recommended that you give your files distictive file names.

>> >> C:\Program Files (x86)\Fluke FIDE\Scripts\test.9lc -> C:\Program Files

>> (x86)\Fluke FIDE\Internal\test.9lc (exists).

>> >> ERROR: Could not create batch file C:\Program Files (x86)\Fluke

>> FIDE\Internal\9lc.bat.

>> >> Permission denied

>> >> Batch

>> >> file processing failed.

>> >> _______________________________________________

>> >> Techtoolslist mailing list

>> >> Techtoolslist at flippers.com

>> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

>> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>> >> _______________________________________________

>> >> Techtoolslist mailing list

>> >> Techtoolslist at flippers.com

>> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

>> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>> >> _______________________________________________

>> >> Techtoolslist mailing list

>> >> Techtoolslist at flippers.com

>> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

>> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>> >

>> >_______________________________________________

>> >Techtoolslist mailing list

>> >Techtoolslist at flippers.com

>> >http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> >FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

>> >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>>

>_______________________________________________

>Techtoolslist mailing list

>Techtoolslist at flippers.com

>http://seven.pairlist.net/mailman/listinfo/techtoolslist

>FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

>Archive site: http://seven.pairlist.net/pipermail/techtoolslist/