[Techtoolslist] Fluke 6809 Pod Troubleshooting

[Kevin Moore]

I've had many pods that the only problem was a problem was with the self
test socket not making good contact.

Kevin



On Tue, Apr 16, 2013 at 10:39 AM, Theron Troxel <troxelone at yahoo.com> wrote:


> I have a 6809 pod that I finally got around to testing and is coming up

> with "POD  TIMEOUT - ATTEMPTING RESET" error.  Looking at the manual for

> the 6809 pod, it says to check for short to the crystal or clock depending

> on the chip.  Would I start on pin 39 of the self test socket and follow

> the schematics back and check the lines on U27, U22, and U23 that's if the

> enable line on U27 is low?  Or, am I looking in the wrong spot on the

> schematics?

>

> Any other advice when trouble shooting these?

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>