[Techtoolslist] Interesting stuff on eBay...

John Robertson jrr at flippers.com
Wed Jun 12 21:35:07 EDT 2013


On 06/12/2013 6:27 PM, bstnguy at gmail.com wrote:

> They are great for working in pinball machines or arcade games with multiple processors.


Ah, but my shop has all the game test fixtures (Bally-Stern (SAM
IV)/Williams (6-WPC95)/Gottlieb (1-80C)) on benches, so we just roll up
the 9010 on the 'scope cart and dig in!

So, these Series 90s are going to be useful to someone else, it's just
in my shop they collect dust.

Along with Arium logic analyzers, Fluke 9100s (still trying to figure
out the SCSI upgrade!), KK stuff, HP stuff...I've been collecting tech
tools for many, many years...it's a long, long list.

John :-#)#

>

> On Jun 12, 2013, at 9:22 PM, David Shoemaker <davids at oz.net> wrote:

>

>> I never do component level work in the field other than Williams ram.

>>

>> -----Original Message-----

>> From: "John Robertson" <jrr at flippers.com>

>> Sent: ‎6/‎12/‎2013 4:46 PM

>> To: "techtoolslist at flippers.com" <techtoolslist at flippers.com>

>> Subject: Re: [Techtoolslist] Interesting stuff on eBay...

>>

>> On 06/12/2013 4:25 PM, Alan McCormick wrote:

>>> I have a Z80 Fluke 90 and someplace I have the manual. IIRC the manual

>>> seemed to infer that there were similar versions for other MPUs

>>> although I've never seen another 90 of any sort. It does have a

>>> built-in serial port which I used to do memory dumps of some protected

>>> games. Picked mine up for $20 at a hamfest years ago.

>>>

>>> The auction comments about it needing a power supply are misleading.

>>> It leeches off the UUT but iirc there was an external PSU that could

>>> be used if the UUT couldn't handle the extra current.

>>>

>>> Never opened mine up. Don't think my manual had schematics.

>> I never saw any schematics for this device, other than what I made up to

>> convert another one I had to Z80.

>>

>> These can work well as long as the board designer followed the Z80

>> manufacturers specs and used pull-up resistors on Bus Request and a few

>> others.

>>

>> There are at least four CPUs covered in the series, Z80, 8085, 6809 and

>> another...and it is interesting to watch the device in action, testing

>> RAM while the game is running in attract mode is quite amusing! However

>> I must confess these all sit on the shelf as giant dust bunnies as I use

>> the 9010 instead on the few game boards I still service.

>>

>> However for field work they would be great, so (quick poll) how many of

>> us fix 8-bit CPU based devices in the field??

>>

>> John :-#)#

>>> ------------------------------------------------------------------------

>>> *From:* John Robertson <jrr at flippers.com>

>>> *To:* "techtoolslist at flippers.com" <techtoolslist at flippers.com>

>>> *Sent:* Wednesday, June 12, 2013 2:53 PM

>>> *Subject:* [Techtoolslist] Interesting stuff on eBay...

>>>

>>> Fluke 90 series Z80 on-board tester (I have one so am not bidding):

>>>

>>> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310687268151&ssPageName=ADME:B:SS:US:1123

>>>

>>> Also a bunch of Kurz-Kash adapter cards (I already have all those so

>>> am not bidding on any):

>>>

>>> http://www.ebay.com/sch/i.html?_odkw=Kasch&_osacat=0&_from=R40&_trksid=m570.l1313&_nkw=Kurz+Kasch&_sacat=0

>>>

>>>

>>> John :-#)#


--
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
www.flippers.com
"Old pinballers never die, they just flip out"




More information about the Techtoolslist mailing list