[Techtoolslist] tinning ICs?

Rodger Boots rlboots2 at gmail.com
Mon Aug 26 16:59:10 EDT 2013


Dip leads in liquid rosin flux before the solder pot.
On Aug 26, 2013 3:43 PM, "david grohowski" <electronicamuse at aol.com> wrote:


> about 15 years ago I used to buy refurbed ram and cpus from a company and

> I have never been able to duplicate their quality. their ICs' legs were

> clearly dipped into something like a solderpot. I have one with new solder

> bar and even if I clean the legs manually, then wash or clean with alcohol,

> etc, it never bonds like theirs. maybe in part it's because the parts I

> was trying to refurn were in bad shape to begin with. you arcade guys know

> exactly what I mean. anybody had good success stories?

>

>

> thx

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>



More information about the Techtoolslist mailing list