[Techtoolslist] Can anyone identify this chip?

Rodger Boots rlboots2 at gmail.com
Tue Nov 19 20:48:22 EST 2013


This VTI is VLSI Technology, Inc and is NOT the company bought by Murata.
The Wiki says: The company was later acquired by Philips and survives to
this day as part of NXP Semiconductors.

What he apparently has is a mask-programmed ROM with oddball chip selects
like the old Bally pinballs used.

I had attached a datasheet yesterday in this thread that wasn't the correct
part, but DID have the correct logo on top of sheet 1 and the full company
name on the bottom of the sheets.
On Nov 19, 2013 7:32 PM, "Clay Cowgill" <c.cowgill at comcast.net> wrote:


> That could be an 8Kx8 EEPROM. The '2365' part is jogging a memory way in

> the back of my brain from decades ago while making a 'flash cart' for an

> Atari 2600 development system. ;-)

>

> I think the VTI part is correct-- the logo on the chip looks like:

> http://www.xsmicro.com/parts/VTI/2365-1181/

>

> Maybe try reading it like a 28C64?

>

> I'd wager a guess that it was the same place Murata bought, but back when

> they started out they were just making crosses for other manufacturers to

> get a start before doing their own stuff. (So like Sipex and Macronix that

> started off making Maxim RS232 chip copies and commodity EPROMs as a way to

> pay for their R&D of their own stuff which would eventually take over the

> catalog.)

>

> -Clay

>

> -----Original Message-----

> From: techtoolslist-bounces at flippers.com

> [mailto:techtoolslist-bounces at flippers.com] On Behalf Of Joseph Magiera

> Sent: Tuesday, November 19, 2013 5:26 AM

> To: Technical Tools Mail List

> Subject: Re: [Techtoolslist] Can anyone identify this chip?

>

> Hmmm... I can see I attached a pic, but it didn't get through. Sorry about

> that. I have posted the pic here:

>

> http://www.tollianweb.com/uc/vti.jpg

>

> It's IC 1N from an Exidy 440 PCB (Whodunit in this case). I'd really like

> to identify the manufacturer. I looked at several IC logo web sites and

> nothing comes up. It's in a bank of 2764's and supposedly supposed to be

> able to be read as a 2764, but my EETools Top Max is unable to read it.

> Really a mystery to me why I can't find this symbol at all (and why if it

> is

> equivalant to a 2764 my reader can't read it). It's not a bad chip as the

> game boots up and passes all self tests without any complaining.

>

> If anyone might be able to identify what IC is on 6K on the same boardset

> type, that would be appreciated too. On my board, it's a National 74S28(x)

> where "x" is either a 7 or an 8, but it's overlayed with an Exidy part

> number stamp. National 74S287 crosses to an MMI 6301 (Signetics 82S129)

> and

> a 74S288 crosses to a MMI 6331 (Signetics 82S123).

>

> Trying to dump a Whodunit ROM version that's not in MAME. Thanks,

>

> Joe

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>



More information about the Techtoolslist mailing list