[Techtoolslist] 9100FT

[Andrew Welburn]

hey Corey..

  I've now tried the Samdisk version of the service disk fron the ttl 
ftp site (60serv.dsk) and it still gives me the invalid service id..

can you send me, or upload to the ftp site the patched disk image?? i'd 
very much appreciate it..

Andrew Welburn
http://www.andys-arcade.com

On 14/12/2013 16:15, Corey Stup wrote:

> On 12/14/2013 10:42 AM, Andrew Welburn wrote:

>> so i went back into the techtools FTP and found the v6 service disk

>> (SERVICE60.TD0), but i get the following error message when i try it

>> out on my 9100FT :

>> http://www.andysarcade.net/pix/DSC_1711.JPG

>>

>> "Fluke 9100A Service Init Disk, v6.0

>> This Board Has An Invalid Service ID"

>>

>>  Does this mean it doesn't like the fact its a 9100FT (not 9100A), or

>> does it mean the disk is serialised to a particular machine? (i

>> thought by v6 they had done away with serialisation)

>>

>> now, there's another disk image on the FTP - 60SERV.dsk - but its in

>> the SAMdisk format, and i dont have an internal floppy drive any more

>> to build and test this one...

>>

>> could it be that these are two different types of v6 service disk? Can

>> anyone remember which is which?

> The 6.0 disk was originally serialized.  I created a patch to remove the

> serial check at one point, and I thought I uploaded the patched disk.

> The 6.0 disk doesn't have the SCSI format tools so you still need the

> V1.4 disk as well.

>

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>