[Techtoolslist] IEE-488 / Arduino->USB

William Stillwell wkstill at franz-family.com
Fri Mar 27 22:50:47 EDT 2015


Andy,

Here is a cheapy Arduino->Gpib controller...

Make sure you read the disclaimer :P

http://egirland.blogspot.it/2014/03/arduino-uno-as-usb-to-gpib-controller.ht
ml

Although, was made for the TEK2232 and HP853 


William Stillwell
Hamster / KI4SWY
Stillwell Software Solutions.
Free Play Florida Arcade & Pinball Show Organizer

-----Original Message-----
From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
Andy Smout
Sent: Monday, March 23, 2015 6:55 AM
To: techtoolslist at flippers.com
Subject: Re: [Techtoolslist] Fwd: Re: Fluke 9000 series manual wanted -
Remote Operation, publication B0147

good thinking william! that gives me a starting point to read up on some
commands. at least the standard 488 commands are there on the 9110ft. 
i'll dig a little deeper :)
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/



More information about the Techtoolslist mailing list