[Techtoolslist] 9100FT

[John Robertson]

On 12/14/2013 8:15 AM, Corey Stup wrote:
> On 12/14/2013 10:42 AM, Andrew Welburn wrote:
>> so i went back into the techtools FTP and found the v6 service disk 
>> (SERVICE60.TD0), but i get the following error message when i try it 
>> out on my 9100FT :
>> http://www.andysarcade.net/pix/DSC_1711.JPG
>>
>> "Fluke 9100A Service Init Disk, v6.0
>> This Board Has An Invalid Service ID"
>>
>>  Does this mean it doesn't like the fact its a 9100FT (not 9100A), or 
>> does it mean the disk is serialised to a particular machine? (i 
>> thought by v6 they had done away with serialisation)
>>
>> now, there's another disk image on the FTP - 60SERV.dsk - but its in 
>> the SAMdisk format, and i dont have an internal floppy drive any more 
>> to build and test this one...
>>
>> could it be that these are two different types of v6 service disk? 
>> Can anyone remember which is which?
> The 6.0 disk was originally serialized.  I created a patch to remove 
> the serial check at one point, and I thought I uploaded the patched 
> disk.   The 6.0 disk doesn't have the SCSI format tools so you still 
> need the V1.4 disk as well.
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
>
Hi Cory,

I don't have an archive of the deserialized disc image, can you either 
email it directly to me or upload and I'll put it on the shared directory?

Thanks,

John :-#)#

-- 
How to subscribe or unsubscribe from TTL 
http://seven.pairlist.net/mailman/listinfo/techtoolslist