[Techtoolslist] 9100FT

[Andrew Welburn]

I believe so, but only Corey seems to have the working disk to answer 
this. My system has 16mb installed, and tests the 16mb, but again only 4 
is available to the OS. Its unclear to me how much of a difference this 
will make to the system even if it could address the whole 16, i never 
run into any problems with just 4. Its just nice to know/use seeing its 
there. I put 32mb in it, but the BIOS test only runs to 16 so there's no 
point ramming in more than that.

Andrew Welburn
http://www.andys-arcade.com

On 01/06/2015 07:39, William Stillwell wrote:
> I have a question...
>
> I have a 9110FT , it has 8 1MB Simms in it giving it 8MB of ram, now, when
> it boots it does a selftest of the 8MB , but when the software loads it says
> only has 4MB, does this disk fix that?
>
>
>
> William Stillwell
> Hamster / KI4SWY
> Stillwell Software Solutions.
> Free Play Florida Arcade & Pinball Show Organizer
>
> -----Original Message-----
> From: Techtoolslist [mailto:techtoolslist-bounces at flippers.com] On Behalf Of
> John Robertson
> Sent: Monday, June 1, 2015 10:16 AM
> To: Technical Tools Mail List
> Subject: Re: [Techtoolslist] 9100FT
>
> On 12/14/2013 8:15 AM, Corey Stup wrote:
>> On 12/14/2013 10:42 AM, Andrew Welburn wrote:
>>> so i went back into the techtools FTP and found the v6 service disk
>>> (SERVICE60.TD0), but i get the following error message when i try it
>>> out on my 9100FT :
>>> http://www.andysarcade.net/pix/DSC_1711.JPG
>>>
>>> "Fluke 9100A Service Init Disk, v6.0
>>> This Board Has An Invalid Service ID"
>>>
>>>   Does this mean it doesn't like the fact its a 9100FT (not 9100A), or
>>> does it mean the disk is serialised to a particular machine? (i
>>> thought by v6 they had done away with serialisation)
>>>
>>> now, there's another disk image on the FTP - 60SERV.dsk - but its in
>>> the SAMdisk format, and i dont have an internal floppy drive any more
>>> to build and test this one...
>>>
>>> could it be that these are two different types of v6 service disk?
>>> Can anyone remember which is which?
>> The 6.0 disk was originally serialized.  I created a patch to remove
>> the serial check at one point, and I thought I uploaded the patched
>> disk.   The 6.0 disk doesn't have the SCSI format tools so you still
>> need the V1.4 disk as well.
>>
>>
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist at flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>>
>>
> Hi Cory,
>
> I don't have an archive of the deserialized disc image, can you either email
> it directly to me or upload and I'll put it on the shared directory?
>
> Thanks,
>
> John :-#)#
>
> --
> How to subscribe or unsubscribe from TTL
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>