[Techtoolslist] Wireless Enabled Fluke 9010A, Anyone?

John Robertson jrr at flippers.com
Wed Sep 30 17:00:40 EDT 2015


On 09/30/2015 12:42 PM, Andre Huijts wrote:
> Cool. I was looking at RS232 to Wifi adapters/modules on ebay and wondered if they could be used. It should keep work, descriptions say you can configure them to be fully transparent.
>

Not to mention RS-232 or USB to Bluetooth.

John :-#)#
> Verstuurd vanaf mijn iPad
>
>> Op 30 sep. 2015 om 21:17 heeft Brad Gass <bradg at digitalplains.net> het volgende geschreven:
>>
>> Is anyone interested in (internally) wireless enabling their Fluke 9010A for communication with FIDE? It requires the factory Fluke RS232 interface, and will disable the use of the wired DB25 (although it is a reversible modification if you ever wanted to).
>>
>> If there is some interest, in the coming weeks I can put together some details on how I made the modifications to my two 9010A's. It does take a little time and some soldering, but makes for a tidy, self contained setup - I'm almost always glad to eliminate some copper spaghetti from the bench when I can. With enough interest, I may consider running some of the adapter PCB's I designed for myself and offer to others who are interested.
>>
>> --Brad
>> _______________________________________________
>>

-- 
How to subscribe or unsubscribe from TTL 
http://seven.pairlist.net/mailman/listinfo/techtoolslist


More information about the Techtoolslist mailing list