[Techtoolslist] Fluke 9105

Andre Huijts a.huijts at upcmail.nl
Sat Nov 14 05:09:08 EST 2015


I see now the pics are not very clear/sharp. I’ll take some with my proper camera and post.



> Op 12 nov. 2015, om 16:23 heeft Andrew Welburn <andy at andysarcade.net> het volgende geschreven:
> 
> A 9105 is just a 9100 without the hard disk + controller, plus an extra floppy drive.
> 
> The lack of editing function is only down to a lack of a video card and the special keyboard, plus a monitor. 
> 
> The 9100 does not come with a video card as standard, it was optional, so most 9100's you see cannot edit.
> 
> Andrew Welburn (mobile)
> www.andys-arcade.com
> 
>> On Nov 11, 2015, at 3:00 PM, Tony Jones <tony at tonyjones.com> wrote:
>> 
>> From reading the manuals,  the 9105 has two floppies,  no hard drive
>> and is non-programmable.  being designed to run programs developed on
>> the 9100.
>> 
>> Is the lack of programmability just due to the missing HDD and perhaps
>> different software load?   I looked at the service manual hoping to
>> find out if the SCSI interface is a card or on the mainboard but it
>> didn't say.
>> 
>> I guess I'm curious if it's possible to convert a 9105 to a 9100.
>> This said, I'm guessing the 9105 generally did not come with a
>> graphics card?
>> 
>> Related question;  what from a 9105 is useful - from a spare parts
>> perspective - for a 9100.
>> 
>> Thanks
>> 
>> Tony
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist at flippers.com
>> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

André Huijts
andre.huijts at upcmail.nl







More information about the Techtoolslist mailing list