[Techtoolslist] New to Fluke 9005/9010, WTB pods

John Robertson jrr at flippers.com
Tue Dec 22 01:48:59 EST 2015


On 12/21/2015 9:11 PM, vector wrote:
>
> I'm looking for the following pods for the Fluke 9005A or 9010A:
>
> 6502
> Z80
> 6809
>
> May also be interested in the following pods depending on pricing:
>
> 8080
> 6800
> 6802
>
> If you have any of these available, let me know which and what you are 
> looking to get for them.
>
> Really looking to try to learn this platform during my holiday 
> vacation.  Have a 9005 currently, but no pods ...
>
> Thanks in advance,
>
> -- Curt

Hi Curt,

If you read the archives it is fairly easy to convert a 6800 pod to a 
6502...and the 6800 is often a bit less expensive, assuming you can find 
them. All my sources have long since dried up. It is almost to the point 
where one wants to MAKE replacement pods...(like I have time?).

Seriously though, how hard would it be to create a Multi-Pod? One has 
the problem of the UUT cable of course, but perhaps those of us who play 
with FPGAs/MOSFETs can get around that...I have ideas. In the end you 
would plug in your xxxx CPU, flip a switch bank, and you then have a 
xxxx CPU based pod? Or have the FPGA emulate your CPU, some serial ram 
to pretend to be the CPU ROM, and MOSFET arrays setting up the UUT cable?

John :-#)#
-- 
How to subscribe or unsubscribe from TTL 
http://seven.pairlist.net/mailman/listinfo/techtoolslist


More information about the Techtoolslist mailing list