[Techtoolslist] Anyone have a dead Fluke 8080 pod?

[John Robertson]

On 05/17/2016 12:29 PM, Tony Jones wrote:
> Hi Art.
>
> If you cannot find one, you can always roll your own (albeit
> unshielded) using some ribbon cable and one of these:
> http://www.jameco.com/Jameco/Products/ProdDS/104097.pdf
>
> best
>
> Tony

I'm not so sure - there is something going on in the 40-pin DIP header 
on those cables as they have different numbers depending on the POD. I 
suspect grounds are what is varied, but never tested that supposition...

http://flippers.com/fluke.html

Note the different part numbers for the UUT cables at the bottom of the 
page...

John :-#(#
>
>
>
> On Tue, May 17, 2016 at 12:19 PM, Art <art at artfromny.com> wrote:
>> Looking to buy a decent UUT cable.
>>
>> Thanks
>>
>> Art
>>
>>
>>
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist at flippers.com
>> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
>


-- 
How to subscribe or unsubscribe from TTL 
http://seven.pairlist.net/mailman/listinfo/techtoolslist