[Techtoolslist] For the Fluke Z8000 Pod - making interface PCB for Z8002 CPU

[Ian Eure]

On September 4, 2018 9:00:41 PM PDT, John Robertson <jrr at flippers.com> wrote:
>On 2018/09/04 8:42 PM, John Robertson wrote:
>> I have a Z8000 pod and am in the process of making a PCB for the
>Z8001 
>> test socket on it so I can test Z8002 (Pole Position of course)
>logic. 
>> The PCB is to adapt the Z8002 CPU to the Z8001 test socket.
>>
>> I will likely be making two or three of these (minimum quantity) so
>if 
>> anyone is interested in one for their Z8000 pod please let me know -
>@ 
>> cost plus postage. I plan on having the PCBs run off either later
>this 
>> week or next.
>>
>> John :-#)#
>>
>Right, just remembered that I need two of these, one to load the Z8002 
>in the Z8001 socket on the Z8000 pod, and a second to take the 48 pin 
>cable's UUT Z8001 plug and convert that to the 40 pin Z8002 socket on 
>the PP board.
>
>So, will be making these in pairs. Anyone else interested in a pair?
>
>John :-#)#
>
>-- 
>How to subscribe or unsubscribe from TTL 
>http://seven.pairlist.net/mailman/listinfo/techtoolslist
>_______________________________________________
>Techtoolslist mailing list
>Techtoolslist at flippers.com
>https://pairlist7.pair.net/mailman/listinfo/techtoolslist
>FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

Count me in... If it comes with a Z8000 pod to use it with.