[Techtoolslist] Souping up the 9100A

[John Robertson]

On 2018/09/05 10:38 PM, Ian Eure wrote:
> On September 5, 2018 10:33:31 PM PDT, Tony Jones via Techtoolslist <techtoolslist at flippers.com> wrote:
>> On Wed, Sep 5, 2018 at 10:04 PM, John Robertson <jrr at flippers.com>
>> wrote:
>>
>>> There is that extra expansion slot which is used for the test card,
>> and so I
>>> expect one could use it for installing the PAK-68 or an adaption of
>> it.
>>
>> I had the same thought.  I'm assuming the test-card (if you ever find
>> the instructions) plugs into J4 and some form of cpu accelerator could
>> do the same.   Sounds like a fun project.  I thought I'd read
>> (somewhere) that Fluke designed an Ethernet card which was intended to
>> plug into J4 but it's a very vague recollection.
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist at flippers.com
>> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> I remember this thread as well.  http://seven.pairlist.net/pipermail/techtoolslist/2015q1/002053.html
>
> Never heard anything else about it.
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
That was proposing a network card for the 9100 - perhaps that could be 
built using the same idea as the wi-fi mod for the 9010A?

John :-#)#

-- 
How to subscribe or unsubscribe from TTL 
http://seven.pairlist.net/mailman/listinfo/techtoolslist