[Techtoolslist] FS: Fluke 9100A-3051 diagnostic card for Fluke 9100A

Tue May 31 20:41:54 EDT 2022

Cool, I have a dead 9100A.. but it also doesn't have a display :D

interesting the full 68000 bus is on that connector.

William Stillwell

Board Member - Inspiration labs, Inc. a 501c3 organization - Tampa's
Premier Maker Space.

Board Member & Co-Founder - Byte Amusement Group // Free Play Florida
Arcade & Pinball Show a 501c3 organization

Member of MakerFX - a 501c3 organization - Orlando's Premier Maker Space

Volunteer for The Phoenix - a 501c3 Organization - Providing outreach and
events for those who are living a sober lifestyle.

Former Board Member - West Central Florida Group - a 501c3 Organization. -
Providing Emergency Communications across Central Florida.

On Tue, May 31, 2022 at 8:22 PM Tony Jones <tony at tonyjones.com> wrote:

> $100 + postage,  or trades.
>
> If I'm interpreting this (https://www.ebay.com/itm/185133456934) correctly
> someone paid $250 for one which - to me - seems certifiable.
>
> The card plugs into an expansion slot on the 9100A and you debug the broken
> 9100A using a 9000a-68000 pod + working 9100 (or I guess 9010).
>
> N.B the 9100FT uses a different method (there is a 9132A/Jane sync pod
> connector on the FT motherboard) and you use a 9132 with a 68030
> personality module to debug.
>
> Thanks!
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>