[SBE] Kramer SG-6003B question
Evarts, Duane
Duane.Evarts at echostar.com
Tue Jul 29 18:50:48 EDT 2008
I found evidence of a Kramer BCS-6003B sync generator.
http://www.usedprice.com/dropdown.php?pn=&ob=model&item_id=409344&catnam
e=video_tv&mfrid=7141&typeid=372&query=
Is that what you have?
Duane M. Evarts, Chief Engineer
duane.evarts at echostar.com
Meridian Broadcast Studio
Dish Network Corporation / EchoStar Corporation
9601 S. Meridian Blvd., Englewood, CO 80112
Tel: 720.514.5580 Fax: 303.723.1454
________________________________
From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] On Behalf Of
kjpx47 at cableone.net
Sent: Tuesday, July 29, 2008 5:20 PM
To: kjpx47 at cableone.net; sbe member discussion mail list
Subject: Re: [SBE] Kramer SG-6003B question
What is a Kramer SC-6003B?
On Tue Jul 29 16:13 , 'kjpx47 at cableone.net' sent:
If you have a station sync generator, it should have a 3,58 output that
you can measure with
a frequency counter. the frequency counter must be calibrated to 10 to
the minus 10.
A local 2 way shop may have a service monitor that has been cal too WWV.
If you are using the output of a digital sat receiver, you may have to
run the video thru
a frame sync. gary kenny KCLJ 30 Joplin
On Tue Jul 29 15:25 , 'Bill Whitt' sent:
Hello all,
I had a monitoring service evaluate my transmitter sites for
frequency accuracy. They discovered that my Colorburst is
-15.4Hz . (-5.4Hz)
off freq. The question is .. how do you isolate a 3,579,545.4
MHz signal
with that kind of accuracy. For the life of me I can't seem to
do it. I
don't have a dual input Spectrum Analyzer . so I cant grab
another signal to
compare to . heck my tracking generator isn't that specific to
generate a
perfect signal anyways. The monitoring service uses specially
designed TV
that isolates this signal at the receiver . apparently they can
go down to
0.1 Hz accuracy --- eeekkk.
I have a Kramer SG-6003B - I don't see anywhere on here for an
adjustment.
So, basically I have a signal that I can't figure out how to
measure with
this great of an accuracy, and I can't find anyway to tweak it
if I could
measure it.
I'm thinking the only way out of this .. is to purchase another
generator. The geek in me can't let a signal go without being
able to
measure it somehow. How do you guys measure this signal? Would
you recommend
a better Black Burst/ Genlock / Color sub carrier output device
- maybe one
that can give a frequency output reading?
Help .. sniff sniff
Bill Whitt
_______________________________________________
The SBE Roundtable, SBE at sbe.org
To unsubscribe, go to
http://seven.pairlist.net/mailman/options/sbe
http://seven.pairlist.net/mailman/listinfo/sbe
________________________________
Msg sent via CableONE.net MyMail - http://www.cableone.net
________________________________
Msg sent via CableONE.net MyMail - http://www.cableone.net
More information about the SBE
mailing list