[SBE] STL
k7cr
k7cr at blarg.net
Mon Jul 20 13:02:19 EDT 2009
Sounds like a classic bad pigtail or contaminated connector problem.
R&R Pigtail - Clean all connectors - try again.
Clay Freinwald
----- Original Message -----
From: A9xw at cs.com
To: sbe at sbe.org
Sent: Monday, July 20, 2009 8:56 AM
Subject: [SBE] STL
Forgot to mention, took RX to studio, made a wire dipole antenna and rx was stable with signal level between -50 and -85 (changed by moving antnena) with no variances over 24 hrs. So problem seems site specific.
Henry
------------------------------------------------------------------------------
_______________________________________________
The SBE Roundtable, SBE at sbe.org
To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe
http://seven.pairlist.net/mailman/listinfo/sbe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/sbe/attachments/20090720/fe3399e6/attachment.htm>
More information about the SBE
mailing list