[SBE] truck for sale, EFP, radio, eqpt demo, or ???
a9xw at cs.com
a9xw at cs.com
Fri Feb 5 11:30:23 EST 2010
In this state it is 16,000 pounds. the truck does not require a CDL.
-----Original Message-----
From: Bill Barber <bbarber at sbgnet.com>
To: sbe member discussion mail list <sbe at sbe.org>
Sent: Thu, Feb 4, 2010 7:28 pm
Subject: Re: [SBE] truck for sale, EFP, radio, eqpt demo, or ???
Depends on the state. wb
On 2/4/2010 7:53 PM, John Baich wrote:
> Henry,
> > > > A CDL is required if the truck has a GVWR of 10k or more and used for > commercial purposes; self moving vans are exempt only when used for that > purpose. > > > > > > John J. Baich
> > VP Engineering & Operations
> > Fox Television Stations, Inc. - WFLD/WPWR
> > 205 N. Michigan Avenue
> > Chicago, IL 60601
> > > > 312-565-5540
> > > > john.baich at foxtv.com <mailto:john.baich at foxtv.com>
> > > > P Please consider the environment before printing this email.
> > > > ------------------------------------------------------------------------
> > *From:* sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] *On Behalf Of > *a9xw at cs.com
> *Sent:* Thursday, February 04, 2010 18:21
> *To:* sbe at sbe.org
> *Subject:* [SBE] truck for sale, EFP, radio, eqpt demo, or ???
> > > > Truck: 26' former Ryder rental. front mounted over cab dual compressor > A/C, distributed electric heat. breaker panel with 2 "legs" and about 12 > circuits per leg. Change over relays for shore/gen power. seperate > gen/shore connections for HVAC and Technical. On board, 2 Onan > commercial 7.0 KW generators, cross fed batteries for starting plus > engine charging through diode so gen set cannot drain truck motor start > battery. Gasoline. Interior gen start and meter panels. I think its an > 87 GMC TopKick. [I'll check title} Currently licensed ready to roll. > CDL not required. We bought it from Texas in late 03, put it on the road > in 04. Was in service until middle of 09 when we got a new 42' Gerling > and Sprinter SDI production and sat truck. Equipment was removed in > December of 09 and truck was parked outside Jan 15, 2010. Could be > reloaded and connected in 2 days or less. > > > > Interior has 4 racks in front with standing space behind, counter top, > far left was cut out for GVG 200 switcher. I have full Autocad > Documentation of layouts, floor plan and cables. There is audio booth in > middle area with over head rack and window to see front monitors. Behind > is 3 rack with counter set up for two edit controllers and monitors. > Rack 3 was switcher and support hardware. Space for 4th rack.
> > Front had Chyron Infinite and GVG200 was fully loaded with GVG 2 ch > DVE. We ran 6 DVCam decks, 5 cameras. > > Full connector bay on front passenger side of box for inputs, outputs, > IFB, intercom and door light. internal connector panel in back area of > truck that also serves as storage for reels between racks and back lift > door. One side door between audio and rack space on passenger side. > aluminum steps slip on. WITH OR WITHOUT EQUIPMENT: GVG 200, analog > monitors (various color and B&W source) Infinite with latest software, > RTS intercom (wired for 4 internal stations and 6 external). Cables run > front to back in covered plastic cable tray both sides of truck. Cables > left in place with full documentation. Audio mixer was Mackie 1604VLZ > and over head rack held CD, patch panel, audio DA's, audio processor and > over mixer light. Interior lights DC and AC. 4 channel DPS frame sync > lots more.
> > Well maintained, starts and runs fine. I think about 90k miles. > Currently WHITE but yellow showing in places. Truck has been garaged and > all equipement is in our station building, racked and stacked. Truck was > never rented to others. No damage. > > Great for someone that wants a starter truck that can do sports, news, > EFP, church etc.
> > > > MAKE AN OFFER!
> > > > Henry Ruhwiedel
> > WYIN TV WLPR FM
> > a9xw at cs.com <mailto:a9xw at cs.com>
> > > > > ------------------------------------------------------------------------
> > _______________________________________________
> The SBE Roundtable, SBE at sbe.org
> To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe
> > http://seven.pairlist.net/mailman/listinfo/sbe
_______________________________________________
The SBE Roundtable, SBE at sbe.org
To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe
http://seven.pairlist.net/mailman/listinfo/sbe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/sbe/attachments/20100205/8c4ca8a4/attachment.html>
More information about the SBE
mailing list