[SBE] truck for sale, EFP, radio, eqpt demo, or ???

Bill Barber bbarber at sbgnet.com
Thu Feb 4 20:28:47 EST 2010


Depends on the state. wb

On 2/4/2010 7:53 PM, John Baich wrote:

> Henry,

>

>

>

> A CDL is required if the truck has a GVWR of 10k or more and used for

> commercial purposes; self moving vans are exempt only when used for that

> purpose.

>

>

>

>

>

> John J. Baich

>

> VP Engineering & Operations

>

> Fox Television Stations, Inc. - WFLD/WPWR

>

> 205 N. Michigan Avenue

>

> Chicago, IL 60601

>

>

>

> 312-565-5540

>

>

>

> john.baich at foxtv.com <mailto:john.baich at foxtv.com>

>

>

>

> P Please consider the environment before printing this email.

>

>

>

> ------------------------------------------------------------------------

>

> *From:* sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] *On Behalf Of

> *a9xw at cs.com

> *Sent:* Thursday, February 04, 2010 18:21

> *To:* sbe at sbe.org

> *Subject:* [SBE] truck for sale, EFP, radio, eqpt demo, or ???

>

>

>

> Truck: 26' former Ryder rental. front mounted over cab dual compressor

> A/C, distributed electric heat. breaker panel with 2 "legs" and about 12

> circuits per leg. Change over relays for shore/gen power. seperate

> gen/shore connections for HVAC and Technical. On board, 2 Onan

> commercial 7.0 KW generators, cross fed batteries for starting plus

> engine charging through diode so gen set cannot drain truck motor start

> battery. Gasoline. Interior gen start and meter panels. I think its an

> 87 GMC TopKick. [I'll check title} Currently licensed ready to roll.

> CDL not required. We bought it from Texas in late 03, put it on the road

> in 04. Was in service until middle of 09 when we got a new 42' Gerling

> and Sprinter SDI production and sat truck. Equipment was removed in

> December of 09 and truck was parked outside Jan 15, 2010. Could be

> reloaded and connected in 2 days or less.

>

>

>

> Interior has 4 racks in front with standing space behind, counter top,

> far left was cut out for GVG 200 switcher. I have full Autocad

> Documentation of layouts, floor plan and cables. There is audio booth in

> middle area with over head rack and window to see front monitors. Behind

> is 3 rack with counter set up for two edit controllers and monitors.

> Rack 3 was switcher and support hardware. Space for 4th rack.

>

> Front had Chyron Infinite and GVG200 was fully loaded with GVG 2 ch

> DVE. We ran 6 DVCam decks, 5 cameras.

>

> Full connector bay on front passenger side of box for inputs, outputs,

> IFB, intercom and door light. internal connector panel in back area of

> truck that also serves as storage for reels between racks and back lift

> door. One side door between audio and rack space on passenger side.

> aluminum steps slip on. WITH OR WITHOUT EQUIPMENT: GVG 200, analog

> monitors (various color and B&W source) Infinite with latest software,

> RTS intercom (wired for 4 internal stations and 6 external). Cables run

> front to back in covered plastic cable tray both sides of truck. Cables

> left in place with full documentation. Audio mixer was Mackie 1604VLZ

> and over head rack held CD, patch panel, audio DA's, audio processor and

> over mixer light. Interior lights DC and AC. 4 channel DPS frame sync

> lots more.

>

> Well maintained, starts and runs fine. I think about 90k miles.

> Currently WHITE but yellow showing in places. Truck has been garaged and

> all equipement is in our station building, racked and stacked. Truck was

> never rented to others. No damage.

>

> Great for someone that wants a starter truck that can do sports, news,

> EFP, church etc.

>

>

>

> MAKE AN OFFER!

>

>

>

> Henry Ruhwiedel

>

> WYIN TV WLPR FM

>

> a9xw at cs.com <mailto:a9xw at cs.com>

>

>

>

>

> ------------------------------------------------------------------------

>

> _______________________________________________

> The SBE Roundtable, SBE at sbe.org

> To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe

>

> http://seven.pairlist.net/mailman/listinfo/sbe




More information about the SBE mailing list