[SBE] Visio for broadcast equipment?
Henry M. Seiden
info at techworkspro.com
Thu Jul 1 12:02:28 EDT 2010
Thanks. I may tap into the board's suggestions as my friend can get me a cheap, unlimited version of Visio 2010 Pro. I was going to go another route but this is too good to pass up.
On Jul 1, 2010, at 11:50 , David Baden wrote:
> In working with CAD into Visio you can import a 2d CAD dwg dxf into Visio but you have to do a left click conversion process to make it editable and that is limited.
>
> Generally if I am importing a CAD into Visio for say a floor plan I export the CAD as an image (bmp, wmf) and use it as a base in Visio to draw over.
>
> Regards,
>
> David M. Baden
>
>
> From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] On Behalf Of Dan Slentz
> Sent: Wednesday, June 30, 2010 7:48 PM
> To: sbe member discussion mail list
> Subject: Re: [SBE] Visio for broadcast equipment?
>
> Henry,
> I haven't found that any work better with CAD. The only difference are the extras like gantt charts, etc.
> If you go to the Microsoft web site, the "compare features" is pretty helpful. I've used the early Visio (think it was 2005), 2007, and am now running on a beta of 2010. I really think 2007 was easier than '10, but '10 adds more bells and whistles.
> Hope this helps you.
> Best wishes,
> Dan
>
> From: Henry M. Seiden <info at techworkspro.com>
> To: sbe member discussion mail list <sbe at sbe.org>
> Sent: Wed, June 30, 2010 12:18:30 PM
> Subject: Re: [SBE] Visio for broadcast equipment?
>
> Which version(s) are best to support CAD-like uses- Standard, Pro, Premium? Are you using 2010, 2007, or earlier?
>
> Henry
> On Jun 29, 2010, at 13:41 , David Baden wrote:
>
>
> We have had Visio stencils on our web site for public download for a while they are not really advertised on the site but mostly there so staff in other offices can access them when needed.
>
> ftp://techweb.rfa.org/pub/3d-project/Stencils/
>
> They are not that organized or being updated regularly. But that said... if people want to upload their stencils we can throw up a page on the site for stencils and have them all up for shared download. It could be a consolidated pool for broadcast related stencils and save redundancy of effort in people recreating the same stencils over and over.
>
> Upload is at:
>
> ftp://techweb.rfa.org/incoming
>
> The site is at http://www.techweb.rfa.org/ and it was setup for broadcasters.
>
> If you are interested or do an upload shoot an e-mail to:
>
> techweb at rfa.org
>
>
>
> Regards,
>
> David M. Baden
> Radio Free Asia
>
> _______________________________________________
> The SBE Roundtable, SBE at sbe.org
> To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe
>
> http://seven.pairlist.net/mailman/listinfo/sbe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/sbe/attachments/20100701/90bccacc/attachment-0001.htm>
More information about the SBE
mailing list