[SBE] Unattended Operation

[Dan Mammone]

Hi Rick,

I have used this monitor for alarms. It has automatic control via scheduler
[setup thru web interface], to raise/lower relays or enable/disable alarms.

It has two interfaces for control: Dial-up and Web. All functions are
accessible thru these. Alarms can also use both interfaces for notification
by phone or email.

Hope that helps. If you find the manual unclear, a call to Don Winget will
prove to be fruitful.

Dan Mammone, CBRE
Media-Com, Inc
WNIR 100.1 - WJMP 1520 - W35AX TV35 - WAOH TV29


  -----Original Message-----
  From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org]On Behalf Of Rick
Young
  Sent: Tuesday, June 14, 2011 5:44 PM
  To: sbe at sbe.org
  Subject: [SBE] Unattended Operation


  Hi,
  I'm a contract engineer in Arizona and am installing a WVRC-8 Broadcast
Tools monitor.  From what I can see, there is no method for raising lowering
power through the day to maintain the licensed power level.  So the question
is, what is actually required for unattended operation?  If we switch to day
pattern (1500w non-directional) there is an old Burk unit which maintains
the power level through macros.  Same at nite.  With the WVRC-8, there are
no macros, just the ability to switch day/nite.  Comments here are
appreciated.  Thanks in advance!

  Rick Young
  Member #5633


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/sbe/attachments/20110615/1171f262/attachment.htm>