[SBE] NEC/4 Modeling
Cris Alexander
crisa at crawfordbroadcasting.com
Thu May 17 16:12:17 EDT 2012
Is this for AM broadcast? If so, set the environment for ground plane and
forget about trying to model a buried ground medium.
______________________________
W.C. Alexander, CPBE, AMD, DRB
Crawford Broadcasting Company
Denver, CO
(303) 433-0104 Tel.
(303) 433-0905 Fax.
From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] On Behalf Of Paul
Christensen
Sent: Thursday, May 17, 2012 1:39 PM
To: sbe member discussion mail list
Subject: [SBE] NEC/4 Modeling
Looking to validate the buried radial parameters of a .NEC input file for a
non-phased, single monopole radiator. I've been using the geometry builder
utility within 4Nec2 software, but I want to confirm radial depth results as
well as source/load parameters. If anyone has an input file to share, it
would be very much appreciated. I have J.L. Smith's book on order and will
use his examples as well. Thanks!
Regards,
Paul
====================================
Paul Christensen, CPBE CBNT 8-VSB AMD
LAW OFFICE of P. B. CHRISTENSEN, P.A.
3749 Southern Hills, Jacksonville, Florida 32225
Office: (904) 379-7802 Facsimile: (904) 212-0050
<mailto:pchristensen at ieee.org> pchristensen at ieee.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/sbe/attachments/20120517/b0333ac0/attachment.html>
More information about the SBE
mailing list