[SBE] Linear exciter Matlab interface questions

[Perry Priestley]

Curt: Yes.. I have heard of this problem in a couple of places.  I would try
a different PC first, but if that fails it could be the USB interface that
has failed. At one station, who has this problem, I believe they had to send
the unit back for repair. 

 

Contact me off line for more details.

 

Perry Priestley

 <mailto:perrypriestley at verizon.net> perrypriestley at verizon.net

Cell: +1 410 800 3803

Office: +1 410 750 2165

 

This message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and delete
this e-mail from your system. E-mail transmission cannot be guaranteed to be
secure or error-free as information could be intercepted, corrupted, lost,
destroyed, arrive late or incomplete, or contain viruses. The sender
therefore does not accept liability for any errors or omissions in the
contents of this message, which arise as a result of e-mail transmission. If
verification is required please request a hard-copy version from
<mailto:perrypriestley at verizon.net> perrypriestley at verizon.net or call
directly at 410 750 2165.

 

From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] On Behalf Of Yengst,
Curt
Sent: Friday, April 4, 2014 8:54 AM
To: sbe at sbe.org
Subject: [SBE] Linear exciter Matlab interface questions

 

The TV station I work for has a Linear AT7001 exciter.  (Actually, I think
it's an AT6001 that was upgraded.  Anyway...)

A while back, we were using the GUI interface that uses Matlab and a USB
connection between the exciter and the PC for adjustments and readings.

 

At one point, the hard drive in that computer died, and we had to reinstall
everything from scratch.  Now we can't get the Matlab/GUI to work at all.

 

The USB driver seems to install OK in Windows 7, but the GUI won't open.

 

I tried it on a Windows XP machine, just for grins, and while the Matlab/GUI
software seemed to start OK, the USB driver was not even recognized.

 

Does anyone else have this same combination, and have you had the same
issue?

 

Thanks,

 

Curt

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/sbe/attachments/20140404/842aad61/attachment.html>