[SBE] Pressure Transducers?

[John Pfankuch]

What about Burk’s PT-1?  0-14.6 PSI, requires a 12-24V DC power supply.

John Pfankuch

From: SBE [mailto:sbe-bounces at sbe.org] On Behalf Of Kevin Kidd
Sent: Friday, September 13, 2019 7:16 AM
To: sbe member discussion mail list <sbe at sbe.org>
Subject: Re: [SBE] Pressure Transducers?

I ordered one of these a while back for the same reason and in a short test in the shop, it appeared to work as expected.

30 PSI Pressure Transducer, Pressure Sender Pressure Transmitter Sensor for Oil Fuel Gas Air Water, 1/8"NPT Thread Stainless Steel Pressure Transducer Pressure Sender
by hotzzz
Learn more: https://www.amazon.com/dp/B0748BXFYQ/ref=cm_sw_em_r_mt_dp_U_gB4EDb9BMVNQK

Let us know what you find out.

Regards,

Kevin C. Kidd, CSRE/AMD   -  WD4RAT
kkbclists at kkbc.com<mailto:kkidd at kkbc.com>
Lawrenceburg, TN
KK Broadcast Engineering   -   AM Ground Systems Company
www.kkbc.com<http://www.kkbc.com>  --  www.amgroundsystems.com<http://www.amgroundsystems.com>


On Thu, Sep 12, 2019 at 9:20 PM WBratcher <wbratchr at iglou.com<mailto:wbratchr at iglou.com>> wrote:
I’ve been searching for a while without any luck.  If you do get a positive answer please let everyone know.

Thanks!!!

From: SBE [mailto:sbe-bounces at sbe.org<mailto:sbe-bounces at sbe.org>] On Behalf Of Mark Hiner
Sent: Thursday, September 12, 2019 7:03 PM
To: 'sbe member discussion mail list' <sbe at sbe.org<mailto:sbe at sbe.org>>
Subject: [SBE] Pressure Transducers?

I’m looking for a pressure transducer to monitor pressure on a transmission line.  Phartronics used to sell one but they are apparently out of business.

I want to interface to a remote control system so I need low voltage DC output, 0 to 10 volts most likely.

Any suggestions will be appreciated!

Mark Hiner

_______________________________________________
The SBE Roundtable, SBE at sbe.org<mailto:SBE at sbe.org>
To unsubscribe, go to https://pairlist7.pair.net/mailman/options/sbe

https://pairlist7.pair.net/mailman/listinfo/sbe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist7.pair.net/pipermail/sbe/attachments/20190913/4f325f87/attachment.html>