[SBE] Pressure Transducers?

[Andy Avery]

We have been using the Burk PT-1 with a small 12 Vdc power supply for about
3 years now.

On Fri, Sep 13, 2019 at 7:44 AM John Pfankuch <jpfankuch at hvs-inc.com> wrote:

> What about Burk’s PT-1?  0-14.6 PSI, requires a 12-24V DC power supply.
>
>
>
> John Pfankuch
>
>
>
> *From:* SBE [mailto:sbe-bounces at sbe.org] *On Behalf Of *Kevin Kidd
> *Sent:* Friday, September 13, 2019 7:16 AM
> *To:* sbe member discussion mail list <sbe at sbe.org>
> *Subject:* Re: [SBE] Pressure Transducers?
>
>
>
> I ordered one of these a while back for the same reason and in a short
> test in the shop, it appeared to work as expected.
>
>
>
> 30 PSI Pressure Transducer, Pressure Sender Pressure Transmitter Sensor
> for Oil Fuel Gas Air Water, 1/8"NPT Thread Stainless Steel Pressure
> Transducer Pressure Sender
> by hotzzz
> Learn more:
> https://www.amazon.com/dp/B0748BXFYQ/ref=cm_sw_em_r_mt_dp_U_gB4EDb9BMVNQK
>
>
>
> Let us know what you find out.
>
>
>
> Regards,
>
>
>
> Kevin C. Kidd, CSRE/AMD   -  WD4RAT
>
> kkbclists at kkbc.com <kkidd at kkbc.com>
>
> Lawrenceburg, TN
>
> KK Broadcast Engineering   -   AM Ground Systems Company
>
> www.kkbc.com  --  www.amgroundsystems.com
>
>
>
>
>
> On Thu, Sep 12, 2019 at 9:20 PM WBratcher <wbratchr at iglou.com> wrote:
>
> I’ve been searching for a while without any luck.  If you do get a
> positive answer please let everyone know.
>
>
>
> Thanks!!!
>
>
>
> *From:* SBE [mailto:sbe-bounces at sbe.org] *On Behalf Of *Mark Hiner
> *Sent:* Thursday, September 12, 2019 7:03 PM
> *To:* 'sbe member discussion mail list' <sbe at sbe.org>
> *Subject:* [SBE] Pressure Transducers?
>
>
>
> I’m looking for a pressure transducer to monitor pressure on a
> transmission line.  Phartronics used to sell one but they are apparently
> out of business.
>
>
>
> I want to interface to a remote control system so I need low voltage DC
> output, 0 to 10 volts most likely.
>
>
>
> Any suggestions will be appreciated!
>
>
>
> Mark Hiner
>
>
>
> _______________________________________________
> The SBE Roundtable, SBE at sbe.org
> To unsubscribe, go to https://pairlist7.pair.net/mailman/options/sbe
>
> https://pairlist7.pair.net/mailman/listinfo/sbe
>
> _______________________________________________
> The SBE Roundtable, SBE at sbe.org
> To unsubscribe, go to https://pairlist7.pair.net/mailman/options/sbe
>
> https://pairlist7.pair.net/mailman/listinfo/sbe
>


-- 
Andy Avery
Chief Engineer
KMOS-TV Missouri PBS
Warrensburg, MO
660-441-5795
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist7.pair.net/pipermail/sbe/attachments/20190913/9839f3d0/attachment-0001.html>