[Techtoolslist] Fluke 9010A Input voltage

[Mike Coates]

I seem to recall you had to unplug the mains lead, then slide down a 
panel, and you could then remove and reinsert a plastic thing to then 
say '220' or '240' showing on the outside.

of course, that doesn't mean all flukes have the same setup

Filip Hautekeete wrote:

> Steve,

>  

> There is no panel nor switch on the back. However there is a note 

> referring to the manual (orientation of the mains circuit board). 

> Unfortunately I was not able to locate any information about this in the 

> service manual. I was hoping someone had done this before and could tell 

> me immediately what actions to perform.

>  

> Best regards,

>  

> Filip

> 

>     ----- Original Message -----

>     *From:* Steve C <mailto:steves-lists at dsl.pipex.com>

>     *To:* 'Technical Tools Mail List' <mailto:techtoolslist at flippers.com>

>     *Sent:* Monday, October 31, 2005 7:59 PM

>     *Subject:* RE: [Techtoolslist] Fluke 9010A Input voltage

> 

>     Yes, there is a panel on the back that allows voltage selection – I

>     can’t remember how but it was easy.

> 

> 

>     Steve

> 

>      

> 

>     -----Original Message-----

>     *From:* techtoolslist-bounces at flippers.com

>     <mailto:techtoolslist-bounces at flippers.com>

>     [mailto:techtoolslist-bounces at flippers.com] *On Behalf Of *Filip

>     Hautekeete

>     *Sent:* 31 October 2005 13:27

>     *To:* techtoolslist at flippers.com <mailto:techtoolslist at flippers.com>

>     *Subject:* [Techtoolslist] Fluke 9010A Input voltage

> 

>      

> 

>     Hi all,

> 

>      

> 

>     Is there any easy way to switch the Fluke 9010A from VAC 120

>     (factory installed) to VAC 240 ?

> 

>      

> 

>     Best regards,

> 

>      

> 

>     Filip

> 

>     ------------------------------------------------------------------------

> 

>     _______________________________________________

>     Techtoolslist mailing list

>     Techtoolslist at flippers.com

>     http://seven.pairlist.net/mailman/listinfo/techtoolslist

> 

> 

> ------------------------------------------------------------------------

> 

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist