[Techtoolslist] Fluke 9010A Input voltage

[Franklin Bowen]

Here are some docs for it (from the DLH DVDs):

http://fmbbowen.com:39353/VideoGames/DLH_DVDs/Test%20Equipment/Eprom%20Programmer%20Software/Data-IO%20Unisite%20Programmer%20Software/


At 04:14 PM 10/31/2005, you wrote:

>Good point Rodger, I think that was hidden in the yada, yada part of the 

>instructions for changing voltage that I didn't quote...

>

>Now to find the PDF of the 9010A manuals. They aren't up on the ftp site:

>ftp://ftp.flippers.com/TTL/Test%20Equipment/ the backup CD is buried 

>somewhere in my shop...

>

>John :-#)#

>

>At 3:40 PM -0600 10/31/05, Rodger Boots wrote:

>>Be careful, a lot of times when you change voltage you also should change 

>>the fuse.

>>In the case of the 9010A the line fuse should be 1A fast blow for 120 V 

>>and 1/2 A fast blow for 240 V.

>>

>>

>>

>>Filip Hautekeete wrote:

>>

>>>Hello Steve,

>>>  You are correct. Thanks to John Robertson I figured out there is a 

>>> slide card for voltage selection behind the fuse panel. No need to drag 

>>> the systems out of your garage ;-)

>>>  Thanks for your help!

>>>  Filip

>_______________________________________________

>Techtoolslist mailing list

>Techtoolslist at flippers.com

>http://seven.pairlist.net/mailman/listinfo/techtoolslist


--
Franklin Bowen (Franklin at Bowen.net)
http://fmbbowen.com:39353/