[Techtoolslist] Fluke 9100a

[AL SACCO_comcast]

which system disks are serial # sensitive......ver 4......
I have another 9100a with ver 6.1 ...can I copy them over to the other......
finally got service disk v1.4 unserialize from Jimmy.........
also need display module for 9100a....any 9100a units for parts out 
there......
put in a conner cp-3040a in and works fine ...just display bad (not quite 
right).....
AL
----- Original Message ----- 
From: "Corey Stup" <Corey at Stup.net>
To: "Technical Tools Mail List" <techtoolslist at flippers.com>
Sent: Sunday, April 02, 2006 3:18 PM
Subject: Re: [Techtoolslist] Fluke 9100a



> AL SACCO_comcast wrote:

>> Loaded version 6.0 without any problems....

>> downloaded Ver 6.1 but wouldn't install....

>> comes up with error     os:00f7

>> during sys disk 1 install.............

>> anyone have this problem.........

>> anyway to verify the disks on net with checksum ..............

> The images of 6.1 in the archive are damaged.

>

> I have a machine with 6.1 that I have made tar archives of all the files, 

> but I've not had a chance to make install images from them as of yet.

>

> Note that there is very few differences between 6.0 and 6.1  I seem to 

> remember only the editor and maybe one other change.   Everything else was 

> identical.

>

>

>

>

>

>

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>