[Techtoolslist] Fluke 9010

[Chris Toseland]

Hi AL,
 
Yes I'm still looking for a replacement CPU for the tape unit. However
the days of me having access to equipment to program one are long gone.
 
Chris

	-----Original Message-----
	From: techtoolslist-bounces at flippers.com
[mailto:techtoolslist-bounces at flippers.com] On Behalf Of AL
SACCO_comcast
	Sent: 27 November 2006 04:20
	To: Technical Tools Mail List
	Subject: Re: [Techtoolslist] Fluke 9010
	
	
	Chris ,
	still looking for 8041/8741 mpu for fluke 9010 tape reader ?
	if so , let me know.....
	AL

		----- Original Message ----- 
		From: Chris Toseland <mailto:Chris at muppzlab.co.uk>  
		To: TechToolsList at flippers.com 
		Sent: Sunday, November 19, 2006 7:47 AM
		Subject: [Techtoolslist] Fluke 9010

		Hi folks,
		 
		This maybe a long shot but does anyone have or can
duplicate the controller CPU for the tape drive unit on a 9010?
		My tape unit doesn't work, I've checked the sensors and
even tried driving the CPU input pins directly all to no avail so I and
can only assume that the CPU is dead.
		 
		Thanks
		 
		Chris

		
________________________________


		

		_______________________________________________
		Techtoolslist mailing list
		Techtoolslist at flippers.com
		http://seven.pairlist.net/mailman/listinfo/techtoolslist
		

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/techtoolslist/attachments/20061130/da26b1b9/attachment.htm>