[Techtoolslist] 9100A software

[John Robertson]

Andrew Welburn wrote:

> Is there software on this 9100 that you have written and want to keep?

>

> If so, just copy the relevant UUT's you want to keep and maybe the 

> PROGLIB directories onto floppies and then install the new system 

> software as per whats on my page :

> http://www.andysarcade.net/personal/tech/fluke9100/index.htm

> after you're done, just copy them back to the hdr from the floppy.

>

> And yup, the old miniscribe drives with the exposed rotor arm can 

> sometimes just be rotated to get them going again as they 'stick' in 

> the stepper motor for some reason..

>

> I've never had any serialised software problems, i think this is 

> because with system software above version 5.0 they did away with 

> serialisation altogether it seems? Make sure your main board eproms 

> are also changed as this might also have something to do with the 

> serialisation.

>

> -- 

> Andrew Welburn

> http://www.andys-arcade.com

Hi Andy,

That's a great resource, thanks for taking the time to set it up... 
bookmarked!

John :-#)#


> ----- Original Message ----- From: "John Robertson" <jrr at flippers.com>

> To: "Technical Tools Mail List" <techtoolslist at flippers.com>

> Sent: Saturday, April 16, 2011 2:29 AM

> Subject: Re: [Techtoolslist] 9100A software

>

>

>> John Robertson wrote:

>>> Does anyone have non-serialized software for the 9100A...I've lost 

>>> track of that project from years ago, and want to try out a SCSI to 

>>> Flash adapter, but the unit I just bought has a hard drive failure...

>>>

>>> John :-#)#

>>>

>> Actually it turns out to be a 'shake & bake' hard drive. giving the 

>> drive a twist on powerup gets it turning, and it is loaded with 

>> system 5.0.

>>

>> Now to figure out how to extract the disk image (MFM to SCSI 

>> interface)...a birt rusty as the last time I looked at this was 

>> almost ten years ago...

>>

>> Or I could read the archives a bit more...

>>

>> John :-#)#

>>

>> -- 

>> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call 

>> (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)

>>                 www.flippers.com "Old pinballers never die, they just 

>> flip out"

>>

>> _______________________________________________

>> Techtoolslist mailing list

>> Techtoolslist at flippers.com

>> http://seven.pairlist.net/mailman/listinfo/techtoolslist

>> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ 

>

>

>



-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"