[Techtoolslist] Intersil 5610 (32x8 prom)

John Robertson jrr at flippers.com
Wed Jun 8 11:26:01 EDT 2011


Martin White wrote:

> Hi all,

>

> I think this has come up before, so I guess the answer is no but I figured I'd try again anyway.

>

> Does anyone have the programming info for the Intersil 5610 please? By that, I mean the actual documentation, rather than the device ID for the Data I/O 29B (which I have found courtesy of John).

>

> My programmer, the Dataman 48 Pro+ supports the 82S123 by Philips / Signetics but not the Intersil 5610. Dataman are pretty good and will add support for a "new" device provided you send in samples and info. I've been in touch and explained that I can't really spare the samples as I only have 6 left (and they're OTP) so they've kindly said they'll at least have a nose for me if I can send in the info.

>

> So far I've just mailed in the datasheet for the 82S123 and the 5610 but I suspect that wont be anything like enough. I suspect they'll need the programming reference too.

>

> Thanks,

> Martin.

> _______________________________________________

> Techtoolslist mailing list

> Techtoolslist at flippers.com

> http://seven.pairlist.net/mailman/listinfo/techtoolslist

> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment

> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

>

>

>

Hi Martin,

Well, I tried asking Intersil themselves and they sent me a data sheet
outlining the programming parameters for their early PROMs...so I'm
putting it up on Flippers ftp for any interested parties...it's in the
Data I/O directory (empty otherwise).

John :-#)#

--
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
www.flippers.com
"Old pinballers never die, they just flip out"




More information about the Techtoolslist mailing list